Thermal Radiation Spraying Booth

No.

Project name

Technical requirement and related configuration

1                  

External dimensions

L7020×W5510×H3330 (mm)

2                  

Internal dimension

L6900×W3890×H2650(mm)

3                  

Air volume

36000     m3/h

4                  

On-load wind speed

0.28-0.3   m/s

5                  

Air changes

>240       times / h

6                  

Max. working temperature

60-80     °C

7                  

Temperature rise time 20-60°C

8-10     min

8                  

Fuel consumption

6-8       kg/times

9                  

Total power

14 KW

10              

Room materials

Thickness: 60mm; width: 1170mm; internal and external 0.5 plain color coated sheet, double-sided sealing film and steel strip applied.

11              

Room insulation material

EPS (weight of not less than 16g/cm³)

12              

Access door

Flat plate door W3000*H3000 is adopted, with three 0.6 plain color coated sheets applied internally and externally, with Aluminum corners applied, and with nylon handles, concealed pins and cast steel hinges configured.

13              

Safety side door

W800*H1900; one leaf, nylon handle and pressure lock are configured.

14              

Air induction and exhaust way

Air induced at upper side and exhausted from upper rear

15              

Air supply and exhaust fan

Two 3KW outer-rotor fans are applied to supply air and one 5.5KW series fan to exhaust air.

16              

Heated air circulation air damper

Imported electric air damper

17              

Air duct

Exhaust duct is made of 0.8mm galvanized plate and is of ribbing square structure of 700*700*1000, equipping with three sections of air exhaust straight ducts and one elbow

18              

Accessories

Shell adopts 1.0mm galvanized plate internally and 0.5mm galvanized plate externally; air intake fan is equipped with air intake filter at front, and adopts imported fuel burner, and stainless steel heat exchanger heating box, with oil tank, oil pipes, and oil tank brackets configured

19              

Base

Its height is 280mm; galvanized sheet used to form a shape + rectangular tube is applied; frame around and longitudinal and lateral beams galvanized

20              

Ground screen and diamond plate

Two rows of ground screens, 30*5 flat iron, 8mm twist steel electro galvanized, glass fiber filtering, and three rows of diamond plates are applied

21              

Slope platform

Luxury slope platform painted completely (1800*1000mm* two blocks)

22              

Overhead parts

They are made of galvanized sheet; top screen C-shaped steel iron-through pipe is electrically galvanized; imported 600G top cotton is configured

23              

Top plate

0.8 galvanized plate is used; top plate bracket is made of 40*80 square tube

24              

Lighting lamps

Top side lamps consists of thirty-two 36W fluorescent tubes; waist lamp is composed of twelve 36W fluorescent tubes

25              

Structural parts

Room corners are covered with aluminum alloy materials; all U-shaped grooves and slots are made of 1.2 galvanized sheet.

26              

Electric appliance control cabinet

Paint spray, heating paint spray, drying temperature and time, power supply emergency stop, and temperature limit etc. are required

27              

Environmental protection device

Dry activated carbon environmental protection device (optional) is used