residential 200L galvanized steel hot water geysers with 55mm thickness polyurethane foam

Specifications

Specification:

 Feature:

This is a non-pressurized thermosyphon system, solar collector and cylinder storage tank. connected together. there are no need pump to push the fluid circulation between the collector and cylinder storage tank. it is a sample and economic solution to get hot water supply from the sun. the life time is so long and the price is very competitive.

Advantage:

1.outer tank color steel,best anti-erode material,suitable for acid rain area and bad water quality area.The kind product specially suitable for southeast Asia,Middle East and Middle and South America.

2.Special high quality Insulated material to reducing the heat loss rate 

3.High quality and efficient heat transferring and long life span of  the solar water heater

4.UV stabilized high temperature silicon rubber seals and rings

5.High density polyurethane foam (40kg/m)

6.Can be automatic operate completely if connect with intelligent controller

7.Can be used a auxiliary electric heater as to provide hot water under without sunshine

8.Evacuated tube with SS-CU-ALN/ALN selevtive absorption coating,the life of evacuated tube is 15  years

9.Stable aluminum alloy frame/bracket (thickness 2.5mm), well wind resistance

10.Simple aluominium alloy frame/bracket can install both on inclined and flat roof

11.Optional accessories: intelligent controller ,electric heater,assistant tank magnesium rod

12.Heat preservation 72 hours,Hail resistance 25mm  

About us:

We are a professional solar water heater factory for more than 15 years

 1)Quality control--our defective products rate is 0.001%

2)Imported German(Insulation) material 100%,Make the heat preservation effect is better

 and make your life easier and superior

 3)Economically priced,exquisitely made.Experienced&responsible QC that you can rely on

 4)Adequate supply capacity,Punctual delivery time

 5)Best after sales service are provided