Home > Products > laser distance sensor > Height measuring laser distance meter 0.05-20m frequency 10hz 0.1s measurment time
Height measuring laser distance meter 0.05-20m frequency 10hz 0.1s measurment time
- CHINA ANY PORT
- T/T Credit Card
You May Like
-
1500m long distance laser meter with RS232 Serial port 905nm invisiable light
-
high temperature -20degree to 60degree laser distance meter RS232/485 Connection port measurement accuracy +/-1mm
-
500m Laser distance meter for Storage technology measurment accuracy +/-1mmAA
-
laser distance sensor 250m RS232 /485 output with Leica movement
-
laser distance sensor RS232 Commnication port
-
Top quality 0.15-200m laser distance meter with RS232/485 serial port
Product Details
| Place of Origin | Shaanxi, China | Brand Name | FORESIGHT | |
| Model Number | FST-20 | Size | 28*57*80mm | |
| Measurement Accuracy | ±1mm | Measurement Range | 0.05-20m |
Product Description
Applications:
1. Road traffic
2. Automotive anti-collision
3. Construction survey and design
4. Levelmaterial level detection
5. Robot arm control
6. Fixed length control of container crane spreader
7. Security monitoring
8. Military applications
Power Supply | +6V-32V |
Measurement Accuracy | +/-1mm* |
Measurement rage(no reflector | 0.05-40m |
Measurement time | 0.05-0.5s |
Laser Grade | Ⅱ |
Output Mode | RS232 ,RS485 Communication port |
Laser type | 635nm,<1mw |
Dimensions | 28*57*80mm |
Weight | 120g |
Operation temperature | -10 C°~40 C° |
Storage temperature | -25 C°~60 C° |
Protect Grade | IP54 or IP67 |
* Under the condition of bad measurement(for example if the ambient light is too strong. The point measured diffuse reflection coefficient is too big or too small, measurement accuracy has big error:±1 mm+40PPM).
** Under the condition of strong sunlight or target reflection is bad, please use the board.
Note: if you need RS485 Bus, which can connect 250nos of laser distance sensor at the same time
1.Cable connecting definitions
Red Line------VCC 5VDC or 9-24VDC
Black Liine-----GND
White Line-----RX,
Green Line----TX;
Yellow Line------SGND;
Kindly Prompt: If need to DB9 Female head, so RX,TX and G will be corresponding to connection to Second, Third and Fifth base pin of DB9 head separately.
Demo Software:
Communication:
- Uart: 19200, 8N1
- Send command of “O”: turn on the laser
- Send command of “C”: turn off the laser
Send command of “D”: measure distance and return the results
NOTE: If the laser sensor has any quality problem while using. Please contact the supplier for technical support, please don’t repair or disassemble by yourself, Thanks for your cooperation!.
Demo Software:
· Uart: 19200, 8N1
· Send command of “O”: turn on the laser
· Send command of “C”: turn off the laser
· Send command of “D”: measure distance and return the results
· Send command of “S”: return the module temperature and supply voltage
Frequently Asked Questions (FAQ)
On what kind of targets can be measured?
All opaque targets can be measured. Reliable measurements on transparent targets are not possible.
How is the measurement rate influenced?
The measurement rate is influenced by the target. If the laser light is well reflected by the target, fast measurement rates can be achieved (up to 0.15s in tracking mode).
Does dust influence the measuring process?
If dust overcasts the main part of the laser beam, then your
measurement will be influenced in a negative way. However, this situation can only be found in extreme dusty environment like cement hopper etc.
Is it possible to measure to a moving target?
Yes it is possible. The measured distance is the mean value between the distance at start and end of the measuring process.
What is the Measuring Accuracy?
The measuring accuracy corresponds to the ISO-recommendation ISO/R 1938-1971 with a statistical confidence level of 95% (i.e. ±twice the standard deviation, refer to diagram right. The typical measuring accuracy relates to average conditions and is ±1.5mm for the DLS(H) 15 and ±3.0mm for the DLS(H) 30. This is valid for the tracking mode.
The maximum measuring error relates to unfavorable conditions such as:
- highly-reflecting surfaces (e.g. reflector tapes)
- operating at the limits of the permitted temperature range, adaptation to ambient temperature interrupted
- very bright ambient conditions, strong heat shimmer
The maximum measuring error can be up to ± 2 mm for the DLS(H) 15 and ± 5 mm for the DLS(H) 30.
The DLS-A devices do not compensate changes of the environment conditions. If the environment conditions differ from 20°C, 60% rel. humidity and 953mbar air pressure, the accuracy can be influenced if the measuring distances is longer as 150m.
The effects caused by environment condition are described in:
B.Edlen: “The Refractive Index of Air, Metrologia 2”, 71-80 (1966)
Is the Laser Light eye safe?
Class II lasers are low power (< 1mW), visible light lasers that could possibly cause damage to a person's eyes. Some examples of Class II laser uses are: classroom demonstrations, laser pointers, aiming devices and range finding equipment. If class II Laser beams are directly viewed for long periods of time (i.e. > 15 minutes) damage to the eyes could result. Avoid looking into a Class II Laser beam or pointing a Class II laser beam into another person's eyes. Avoid viewing Class II laser beams with telescopic devices. Realize that the bright light of a Class II Laser beam into your eyes will cause a normal reaction to look away or close your eyes. This response is expected to protect you from Class II Laser damage to the eyes.
Can I connect the DLS device to a Siemens PLC?
Yes, you can connect a DLS device with the RS422 interface to a Siemens S7 PLC. Please find a detailed example in the application section. (AN2010)
Contact Us
- Xi'an Foresight Electronics Technology Co., Ltd.
- Contact nameJack Lee Chat Now
- Phone86-29-87858986
- AddressRm. 11308, Floor 13, Unit 1, Bldg. 1, No. 9 Mansion, North Of Nanerhuan, East Of Yanta Road, Beilin Dist.
Product Categories
New Products
-
Waterproof outdoor laser distance meter with RS232/485 serial port
-
Waterproof Laser OEM rangefinder with RS232
-
FST-3000m laser distance sensor Command Control IP54 or IP67 Options
-
10m laser distance sensor Laser type 635nm,<1mW measurement accuracy +/-1mm RS232/485 Connection port
-
FST-200m laser measurement sensor 0.03-200m measurement accuracy +/-1mm
-
Supplier Wholesale 1000m B73X47X105mm RS232/485 Connection Eight M3 Screws
-
High precison +/- 1mm 250m(0.15-250m) laser distance sensor Measurement rate 5Hz
-
supplier oem 1000m rainproof high quality laser works rangefinder for hunting with RS232/485 Connection port
-
High precison +/- 1mm 250m(0.15-250m) laser distance sensor wtih 4-20mA output
-
905nm 200Hz high frequency laser distance meter
-
waterproof 500m Laser rangefinder for Storage technology measurment accuracy +/-1mmAA
-
1000m long distance laser meter for Elevator positioning measurment accuracy +/-1m
-
laser measurement sensor 0.03-200m measurement accuracy +/-1mm
-
RS232/RS485 distance measurement sensor
-
30m laser distance sensor with IP67 Protection grade
-
150m laser distance meter with RS232/485 Output port measurement accuracy +/-1mm
-
20m laser distance sensor with Digital output Laser type 635nm,<1mw
-
Laser ranging sensor used in stereoscopic warehouse shelves
-
Laser ranging sensor to achieve high steel positioning 20/50m/100m
-
Crane positioning ng 0.05-20m frequency 5-10hz measurment accuracy +/-1mmAA
-
laser rangefinder 0.03-200m measurement accuracy +/-1mm RS232/485 IP54or 67
-
Waterproof Mini laser distance meter with RS232/485 serial port
-
FST-3000m laser distance sensorRS232, RS485 ,4-20MA Analog output
-
laser distance sensor RS232 Interface accuracy +/-1mm for Container location measurement
Popular Searches
- measuring apparatus
- measuring instruments
- metering device
- Measuring Meter
- Dial Indicators
- digital caliper
- micrometer
- measuring tools
- vernier caliper
- dial caliper
- Dial Test Indicator
- Digital Dial Gauge Indicator
- Digital Dial Test Indicator
- Metric Dial Indicator
- Measuring Instrument
- digital vernier caliper
- Coating Thickness Gauge
- Laser Distance Meter
- measuring tool
- spirit level
- tape measure
- Height Measuring Instruments
- Measuring Tool Set
- Laser Spirit Level
- Level Measurement
- Laser Rangefinders
- range finder
- distance meter
- golf rangefinder
- hunting rangefinder
Recommended Products
- YHJ-100J(A) 100m portable explosion proof laser distance meter rangefinder
- MTX100 industrial ethernet switch-MTX100-A5K0005
- 4G Wireless High-Precision Laser Distance Meter: Fast Response and Stable Performance
- Laser Diameter Gauge，Laser Micrometer
- Laser Range Finder BH-VH
- SR2000 Eye-Safe Laser Rangefinder Module
- SR1200 Eye-Safe Laser Rangefinder Module
- laser range finder
- 40m 60m 80m 100m Laser Measure Rangefinder Laser Distance Meter
- 60m Laser Distance Meter Laser Rangefinder Measurer Meter Handheld Area/Volume Measure Tool
- 40M Laser Distance Meter with 5M Tape Measure
- 40M Laser Distance Meter with 5M Tape Measure
Find Similar Products By Category
- Instruments & Meters > Optical Lens & Instrument > Rangefinder
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jack Lee
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile