2in1 bluetooth 3.0 smart bluetooth wrist watch for iphone

Specifications

2013 world frist blutooth headset with watch in one smart bluetooth watch for iphone  

It is not watch only,also is bluetooth headset,free your ear

Bluetooth watch A2 is a new Bluetooth mono headset. It delivers clear voice transmission and high quality sound.With a spare battery, solve the problems of ordinary bluetooth  headset short time communication.It makes your hands-free and calls vibration remaindering. Bluetooth watch A2  is stylish and lightweight for all-day comfortable use. 

Product Specification

* Bluetooth compliance: Bluetooth 3.0

* Support profiles: HSP, HFP and A2DP profile

* Stand-by time: up to 200 hours

* Talk time: up to 1.5 hours

* Battery charging Time: about 2 hours

* Charger voltage: DC5.0V 300~500mA

* Weight: 48.0g

* Package: OEM  Standard Packing

Note: The talk and standby times may vary when used with different mobile or other compatible BT devices, usage settings& styles andenvironments  

Packing details:

A.BLUETOOTH WATCHB. USB charging cable

C. Spongeear bud

D. User manual

User guide

1). Charging USB socket

2). Multi-function button (MFB)

3). LED indicator 

4). Main microphone

5). Time adjust button

6). Power display

7). Calls vibration

Charging

1. User can charge the unit by using a USB cable via a PC.

   1). Before use, please charge the device for 3 hours to make sure the headset is fully charged and the battery reaches its full capacity.

   2). Afterwards, each charge cycle may take up to 2 hours.

   3). Charging for BT

      For Bluetooth: LED indicator will indicate red during charging and turn to blue when charging is complete.

   4). Charging for Watch Base

   1. Both the power display and call vibration reminder will flash and reset when charging.
   2. The character of the battery on the display corresponds to the charging process
   3. No vibration reminder if the symbol on the indicator disappeared because of low power.
   4. The watch base automatically charge the Bluetooth headset

   5). We suggest fully charging the device at least once every 24 hours.

    

   Note: When the battery power is low, the battery display on LED will flash, please recharge the battery as advised above

Pairing / Connect (Tutorial online)

1. 1). It is important to pair the headset with your Bluetooth device for first time use.

   2). Pairing procedure:

   A. Ensure the headset is off.

   B. Press and hold the multi-function button for about 5 seconds until LED blinks blue and red alternately – you will hear a beep.

   C. Search the device from your phone / PC.

   D. Once the “i-Watch BT’’ is found, click “i-Watch BT’’ automatic connect or follow the steps and enter pin code 0000 to pair.

   E. Connect the headset to the device.

   F. Headset is ready for use now.

   3). Once paired and connected, the headset will automatically connect to your phone whenever you turn the headset on again, provided it is in range.

   4). The headset will automatically switch itself off if disconnected for 10 minutes.

    

   Note: We found most problems are caused by improper pairing between the headset and the Bluetooth device. Please follow the online tutorial step-by-step.

    

Basic Operations

5.1     Headset on/off

    Turn on – Press and hold the MFB for 3 seconds until blue LED flashes 3 times and you hear an audible beep.

    Turn off – Press and hold the MFB for 5 seconds until red LED flashes twice and you hear an audible beep.

    NOTE: Under standby mode, the LED indicator will flash blue every 3 seconds.

5.2    Answer a call – Press MFB briefly to answer the call when call vibration reminder.

5.3    Reject a call – Press and hold MFB for 3 times until you hear a beep.

5.4    Re-dial – Briefly press the MFB button twice.

5.5    End a call – Briefly press the MFB once.

5.6    Voice dialing

    Please check if your mobile phone supports a voice dialing function.
If your phone does support this function, follow your mobile phone manual instructions to set it up.

1). Press the MFB briefly, then you can hear a short beep.

2). Say the name of person you wish to call.

3). If the voice tags are paired to the related phone number stored in your mobile phone, the number will be dialed.

5.7    Time adjustment

1)    Ensure the LED turned off, press till LED screen light. The LED will turn off after 8 seconds and press for time showing.

2)    Press till Minutes subtitle flashes.

3)    Time up: Quickly press to increase the time.

4)    Time down: Quickly press to decrease the time.

5) Finally, long press and hold on the button, clock display back to normal.

6)The adjustment of the point in time is same as minute.

Note: When the watch base no power for a long time, the clock will automatically reset.

5.8    Call vibration reminding

         i-watch BT will vibrate when call coming

6. Advanced Operations – Multipoint (Tutorial online)

6.1    No radiation communication via the i-watch BT.

6.2    With call vibration reminding, solve the problems when your BT devices away from you.

6.3 Bluetooth headset is placed on the watch base is very convenient.         

6.4    With a spare battery of the watch base, solve the problems of ordinary Bluetooth headsets short time.

Wearing Instruction Demo