PowerMax 2 802.11b/g/n High Power 2T2R AP/Router

Specifications

AIP-W525H PowerMax 2 is the High-Power 4LAN + 1WAN AP/Routher. PowerMax2 support 2x coverage range then other router, also provide high-speed data-rate up to 300Mbps

Features :

2.4GHz IEEE 802.11n 2x2 MIMO
•Complies with IEEE 802.11bg
•Data-rate up to 300Mbps
•High power and High sensitivity
•Wide coverage
•RF output power adjustable
•Firewall, URL/IP/Port/MAC filtering
•Firmware upgrade via HTTP
•Support Gateway, Bridge and WISP mode
•Multiple ESSID
•QoS enhancement-WMM
•TCP/UDP/ICMP/ARP protocol stack
•Virtual DMZ, Port forwarding
•Easy setup wizard
•Web-based utility
•Passive PoE

SPECIFICATION
Model
AIP-W525H ( PowerMax 2 )
Standard
IEEE 802.11b/g/n
Operation Mode
Gateway Bridge Wireless ISP
Chipset
RTL8196C
Flash/SDRAM
2M / 16M
Antenna
2x 5dBi antennas detachable
Wireless Mode
AP Client WDS AP+WDS
Frequency
2.400~2.483GHz
Data Rate
802.11b: 11, 5.5, 2, 1Mbps 802.11g:
54, 48, 36, 24, 18, 12, 9 & 6Mbps 802.11n(20MHz): up to 144Mbps 802.11n(40MHz): up to 300Mbps
Output Power
802.11b: up to 28 ± 1 dBm 802.11g: up to 26 ± 1 dBm 802.11n: up to 26 ± 1 dBm
Sensitivity
-96dBm @ 802.11b -91dBm @ 802.11g -91dBm @ 802.11n
Security
64/128bit WEP WPA(TKIP with IEEE 802.1x) WPA2(AES with IEEE 802.1x) WPA Mixed
802.1x authentication
Power requirement
DC Jack: 12V DC
PoE: 12V Passive PoE
Operation Temperature
-20°C ~ 60°C
Storage Humidity
10% ~ 90% (Non-condensing)
Dimension(mm)
147 x 98 x 30 mm
Interface
RP-SMA antennas connector x 2 RJ-45 WAN port x 1