New Zealand Manufacturers of Vertical Shaft Impact Crusher

Overview

VSI5X series of Vertical Shaft Impact Crusher is widely used in various metallic and nonmetallic ores, cement, corhart, abrasive material, glass, construction material, machine-made sand, metallurgy, etc. It is also applicable to crush various stones with different hardness in medium and fine crushing area, such as iron ore, non ferrous metal, emery, bauxite, quartz sand, basalt, etc. 

Features

VSI5X series of Vertical shaft Impact Crusher introduces German technology. VSI5X is the key equipment in sand making area with many patents. VSI5X is a kind of totally new high efficient crusher. It has the following features:

1. Rotor with deep chamber increases 30% capacity after perfect design. 
2. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%.
3. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate. 
4. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area.
5. Rhombus shape impact plate is used to prevent side plate from being damaged.
6. Bearing is famous international brand imported from Japan, Sweden, America, etc. 
7. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly. 
8. Spread dish with double purposes can make two feeding ways change easily. 
9. Special seal structure under main shaft guarantee no oil leak without seal. 
10. Japanese hydraulic opening cover device is originally imported. The cover is moved easily and inspection of inner part is easy. 
11. Motor with high grade of protection is selected. The motor has features of high efficiency, low noise, etc. The motor complies with IEC, insulation grade F, protection grade IP54/55.

Working Principle

When entering into impeller, the raw material can be crushed directly by hitting impact plate after it is accelerated and threw out. The raw material can also be divided into two parts by material-dividing plate. One falls down from all around. The other enters into impeller and is accelerated, threw out and collides with the falling material and hit, rebound with impact plate. The circulation hits repeats. As the crushing is moving forward, small particle materials will gradually form a material bed around the impact plate which can improve the crushing effect and protect the machine. The desired artificial sand comes downwards though outlet finally.

Specifications

1. Main technical parameters:

Note: Capacity depends on crushing limestone, material size, moisture and features also affect capacity.

2. Lubricating system parameter:

 Delivery For Stationary Crushing Plant 

Export standard container 20GP OR 40GP,40HQthe spare parts in wooden case.

Liming Products are exported to more than 100 countries and districts all over the world such as Russia, Central Asia, Middle East, Africa, Southeast Asia, Australia Union, North America, South America, etc.

About Us 

Henan LIMING Heavy Industry Science and Technology Co. LTD which mainly manufacture large and medium-sized crushing and grinding equipments was founded in 1987. It is a modern joint-stock corporation with research, manufacturing and sales together.

The company headquarters is located in Zhengzhou National Hi-Tech Industrial Development Zone, where is mixed with tradition and innovation, with an area of 80,000 square meters. The machinery and equipment Industrial Park which is located in Shangjie covers an area of 67,000 square meters.

The products of Liming Heavy Industry have the highly quality and advanced technology. The General Research Institute focuses on research and development of advanced technology and customer-oriented products as well as building up core competitiveness to makes Liming Heavy Industry being the best in the industry.What’s more, LIMING got ISO international quality system certification, European Union CE certification and Russian GOST certification. The company has strong research and development strength and innovation.

As a high-end crushing, grinding and assembling company, LIMING values the technology exchange and cooperation with overseas countries. It wins the huge foreign market with mature product and perfect service system. Liming products are exported to more than 100 countries and districts all over the world such as Russia, Central Asia, Middle East, Africa, Southeast Asia, Australia, European Union, North America, South America, etc.

Over the past 26 years, our company adheres to modern scientific management system, precision manufacturing, pioneering and innovation. Now LIMING has become the leader in domestic and oversea machinery manufacturing industry.

Certifications

The General Research Institute of Liming Heavy Industry focuses on research and development of advanced technology and customer-oriented products as well as building up core competitiveness to makes Liming Heavy Industry a pioneer of the industry. By providing fundamental research results, the institute supports Liming Heavy Industry existing technology and products to be the world's top ones.

The General Research Institute of Liming Heavy Industry is the primary R&D department for technical research and technical management. It is responsible for developing technology applicable to Liming all products, conducting forefront technical research on new products and setting standards; researching vibration, impact, noise, hydraulic technology, power matching and energy saving, new materials and control systems, creating innovative technologies and conceptive products and building up a network-based special and generalized platform for experiments and tests so as to share general experiment and test results.

 Our services 

High quality service is what we are pursuing. Our service is available all around the world. And our high quality service team is ready to provide you with fast and efficient service from the tailored solutions for competitive production process to free training of complete plant installation

Service 

1)  Pre-sale service:Freely provide project designing, process designing, choosing suitable equipment for you.

2)  Medium-sales service: Accompany you to complete the acceptance of the equipment,draft the construction scheme and

detailed process, and complete process of export  stone and sand making production line 

3)  After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.

Service supervision 

Any dissatisfaction on service attitude, service skills, quality and morality of our technical staff , please feel free to contact us by

dialing 24 hours hot line;:0086-21-68911957 for  stone and sand making production line.

How about the quality of your Crusher?

• Our crusher manufactured strictly according to national and international standard. 
• We take a test on every crusher before delivery.

How about price of your crusher?  

• We can give the lowest price of the crusher than market one.
• We do quotation of crusher as soon as possible for any custome.
• Discount of Crusher can be given according to quantity.

How about the after-sale service of your company?

• Our engineer is aviliable to installation Crusher overseas.
• The guarantee period of our Crusher is one year.

Minister of Economic Affairs and Finance Davoud Danesh-Jafari has said that the government pursues the policy of privatizing state economic
organizations, boosting competitiveness and peventing private and state monopoly.

Speaking at an annual gathering of industrialists in lead and zinc sectors, the minister stated Thursday that the Ahmadinejad administration
backs transfer of mines to private sector to increase mineral production, IRIB reported.
Noting that he is participating in the gathering as representative of the government, Danesh-Jafari termed as satisfactory participation of
private entrepreneurs in copper, zinc, lead and aluminum sectors. He called on industrialists in the fields to help the government identify and
solve their problems in a bid to consolidate private mineral production.
He recalled that increasing production activities, encouraging private investors to invest in productive sectors and increasing participation
of cooperatives are among the main policies of Article 44 of the Constitution which seeks large-scale privatization and a leaner government.