Soldering tester HAKKO FG-101

Model Name

HAKKO FG-101

Temperature

Resolution

1ºC(1ºF)

Measurement Range

0 - 700ºC (32 - 1300ºF)^*1

Precision

±3ºC (between 300 and 600ºC)/
±6ºF (between 572 and 1112ºF)
±5ºC/10ºF (other than above)

Sensor

K (CA) type thermocouple

Voltage

Resolution

0.1mV

Measurement Range

0 to 40mV (AC)

Precision

± (5% of reading +1 digit)

Registance

Resolution

0.1Ω

Measurement Range

0 to 40Ω

Precision

± (5% of reading +1 digit)

Display

LCD

3 1/2 digits

Burnout^*2

MAX HOLD

(Refer to "MAX HOLD function.")

Power Consumption

100V-2.6W, 110V-2.9W, 120V-2.6W,
220V-2.7W, 230V-2.8W, 240V-3.0W

Dimensions

200(W)x50(H)x120(D) mm /
7.9(W)x2.0(H)x4.7(D) in

Weight

1kg

Ambient Temperature/
Humidity Range

0 - 40ºC (32 - 104ºF), 20 - 90%RH
(Non condensation)

Environmental Condition

Applicable rated pollution degree 2
(According to IEC/UL61010-1)

^*1 Temperature sensor (191-212) can only be used to measure temperatures below 500ºC (932ºF). To measure higher temperatures, use an applicable temperature probe (see "OPTIONS").
When the tip is not in contact with the conduction plate.
^*2 When a sensor is not attached nor burns out, an alarm symbol of Burnout is displayed. If this alarm occurs, replace/attach with a new sensor. The same alarm symbol is also displayed when a value over the possible measurement range is detected.