Polyethylene Electro Heating Fusion Tape / Sleeve

Specifications

Polyethylene Electro Heating Fusion Tape / Sleeve / hot melt Tape

It is a kind of special-purpose pipe connection, which is made by embedding specific electric heating melt welding wire in the basis of high quality PE sheet with special technicals.

Mainly used for Oil&thermal pipeline, such as Pre-insulated Pipes.

Performance characteristic:

good bonding strength, excellent seal, high air-tightness, no PU leak, corrosion resistant, aging resistant, and easy to operate. Electric hot melt sleeve is an emerging connect fitting in anti-corrosion and thermal insulating industries. Its largely outperforms heat-shrinkable strip in terms of aging-resistance, bonding strength, and ring stiffness, further more, it applies PU foam after melting the jacketed pipes, this process needs much less time than using a heat-shrinkable strip; therefore, electric hot melting sleeves are widely welcomed in joint coating and connecting of heat distribution pipeline and oil pipeline.

 Features & Benefits:

• Waterproof; good sealing capacity;
• Able to withstand axial forces initiated by axial moments of the pipe in the ground;
• Able to withstand radial forces and bending forces; high tensil strength;
• Able to withstand effects of temperature and temperature variatations.
• Have the same thickness of the pipeline insulation layer.
• Could be used as drawing pipe  scope of application: DN200~DN3000mm