direct manufacture electric fridge recycling in China

Dear Customer:

Thanks for your visiting! If you are interested in our products, and you want to get more details and the best offer, please kindly provide us the following information, so we can provide you the optimized proposal and best offer most efficiently. Thanks very much for your corporation.

1. Have you passed the EIA (Environmental Impact Assessment) for recycling this resource?

2. Project Time Table.

3. Any regulations for recycling in your cuntry.

4. Wearhouse layout.

5. Local power supply.

6. Capacity demands.

7. Maximum size of the materials.

8. Any pictures helpful.

Basic information:

1, Equipment capacity : 40-80 sets/hour

2, Dimensions:  41648*10000*7000mm

3, Equipment power: 275 Kw

4, Power supply: three-phase AC 380V/50Hz, 200KVA

5, Nonferrous Recovery rate  <by weight>:≥95%

6,Ferrous Recovery rate <by weight>: ≥ 90%

7, Plastic Recovery rate: ≥95%

8,PUR recovery rate <by volume> : 90%

 9,Noise, dust leaks and exhaust gas emissions in line with national standards and requirements

10, Equipment appearance and color: according to corporate standards.

Company introduction

Hunan VARY Tech.,Co.,Ltd

*Established in 2006,with registered captal CNY 65,000,000.00

*More than 1000 staffs, about 10% are technicians

* Listed on China stock exchange market 

* Turnover reach 30 million USD

* 4 series recycling equipment & dozens of models. Annual production ability

* More than 500 sets More than 60% market share in China WEEE recycling industry

* More than 60% market share in China ELV Recycling Industry

1. Technical Introduction

   Refrigerators Recycling Plant is a set of e-scrap recycling equipment which is used to disassemble refrigerant-contained home appliances such as refrigerators and air-cons. It is consist of pre-processing work station, CFC pumping work position, first body shedding, second shedding and disassembly, sorted materials recycling devices.  Based on technique of foreign companies, we first developed integrative technique of secondary shedding and bow wave shedding with characteristics of high automation, high efficiency, low function cost and zero secondary pollution. It has filled the blank of China’s refrigerator processing equipment and reached advanced international standards.

2. Process flow and Directions

1.The first is to manually disassemble refrigerator cabinet and resulting plastic, wire, glass, circuit board. The 2.second is to reclaim refrigerant to ensure it would not pollute atmosphere.

3.The third is to dismantle compressor and condenser.

4.The fourth is to multi-level shred refrigerator body in shredder. In the shredder polyurethane is sucked out by air pump.

5.The fifth is to separate iron by permanent magnet.

6.In the last step aluminum and copper are separated by eddy current.

The entire processing Equipment is located in an enclosed workshop. Exhaust gas and dust can be discharged by high pressure positive blower after being processed by activated carbon adsorption and hop-pocket dust extraction.

3. Major components 

4. Product Pictures

Trade Fair

       Belgium  IARC                                                    GERMANY Hannover Messe 

       
         USA   LAS VEGAS LAS   ISRI                                                        SINGAPORE  WRF

VARY Certifications

Overseas Sales Manager:Bessie Chen

Skype: ailiang.chen

Tel: 0731-82790115

Phone:+0086 13875962365

Fax: 86-0731-82796318