CRT Separation Machine/waste recycling equipment

2.CRT technical introduction

CRT Recycling Equipment is a set of equipment which is used to disassemble television and PC monitor. Its process flow includes CRT explosion-proof belt cutting off, insulating glue cutting off, separation of panel and funnel glass and collection of phosphor powder. The entire process is environment-friendly, safe and efficient.

3.Specification

Dimensions: 2000±15mm X 1800±15mm X 1800±15mm(LxWxH)

Process Capacity: 30-40 pcs/h

Total Power: 10Kw

CRT Size: 15’~32’

Drive Motor Power: 0.75Kw

Centrifugal Fan Power: 2.2KW(Dust Removal)

Vacuum Cleaner: 2KW(Phosphor Collection)

4.External Conditions

3.1 The equipment performs reliable operation under temperature of 0°C~40°C and relative humidity of 85%.

3.2 Input Power:380V/220V±10% , 50HZ.

3.3 Compressed Air Pressure: 0.45MP-0.8MP.

5.Major Components

The equipment is composed of major 9 systems including:

Working platform,

CRT transport,

CRT centralize device,

Rotary disc driving system,

Glass cutting mechanism,

Nichrome HOT WIRE rolling & heating device,

Dust filter & protection shield,

Vacuum cleaner

Electric control system.

6.Recycling disposal route

7.CRT production line

VARY CRT S

eparation Machine line

Introduction

The CRTs are stripped from the housing and electronics and placed in the implosion protection removal station.
At this point the vacuum is released, and stickers, electronic gun and implosion tape removed.
In the separation station the CRT is centered by two clamping chucks, the screen-size is measured and
the processing height is automatically set.

To make the separation of the CRT more accurate (and the heating time shorter) a scratch around
the screen is made. Two parallel switched bands are applied on the scratched line and the heating process starts.
Heating time required will depend on the size of the CRT. The funnel glass and the shadow mask are removed,
and the panel glass is placed in the cleaning station for removal of the powder.