bearing heater machine /bear heater

                          bearing heater machine /bear heater        

this is the technology data for the bearing heating machine working demands 

it could be show the bearing heating machine suitable for the bearing inner diameters 20-120mm

this is the bearing heating machine for the bearing heating working demands it could be best design for those machine working 

this is the bearing heating machine for the machine 

this is the bearing heating use , it could be best suitable for the bear heating working demands 

1, Connect the power (220V/380V) and instrument lights on.
2, Instructions in accordance with the instrument temperature, press“∧”or“∨”Set the heating to the desired temperature,Then Press"START"to Start,press"STOP"to stop.
3, Indicated by the instrument time,press “∧”or“∨”Set the heating time required,press the "START", and start the heating. Press the "STOP" to stop.
4, According to the work piece diameter select heating yoke, the work piece is heated sleeve on the yoke (or set the pole), the yoke on the transformer two pillars end face and pressed activities of yoke. (Note: in the column end face of the to wipe butter.)
5, Sensor sucked into the work piece, press the "START", and start the heating. Press the "STOP" to stop.
6, When the set heating temperature (time) reaches the set value, the machine automatically stops working.
7, Remove the work piece after the end of the installation.

this is the advantege for the bearing heating machine working demands it could be best suitable for the induction heating machine  working demands use 

this is the shipping and express for the  bearing heating working