centrifugal water pumps for water 12 volts KRDC-380

Specifications

Application

1. Fountain 

2. Aquarium
3. Air-cooler
4. Small fish pond
5. Garden/Farm irrigation
6. Water supply for remote areas etc all water feature system
7. koi pond and all other water features due to the advanced technology used in our pump

Pump Feature:
1. Perfect for indoor or outdoor use.
2. Compact design, quiet, safe and long lasting.
3. High efficient-save on operating cost, and energy saving up to 50% than before
4. Completely non-corrosive
5. It has good waterproof, high dielectric strength
6. Pumps are suitable for fresh and marine water

Clearing:
1. To clean the pump, remove the back cover and the impeller.
2. Use a small brush or stream of water to remove any debris
3. IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
a). Check the power to ensure the pump is getting electrical power.
b). Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.
c). Check the inlet to ensure it is not clogged with debris.
d). Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed.
4. Monthly maintenance will add to your pump's life
5. We guarantee our products for a period of 12 months

Power supply: 
It can be powered directly by :

1. 12v Solar panel; 

2. DC 12v electric source; 

3. 12v battery.

Note:

1. Do not mix the positive (+) and negative (-) connection.

2.The pump is submersible pump, it must be full submerged in the water. 

3.Do not dewatering work for long time.