Energy Star UL cUL listed 800lm 13w led disk light 4inch 5/6 inch, led disk lighting 6 In. Recessed Soft White LED Disk Light

Energy Star UL cUL listed 800lm 13w led disk light 4inch 5/6 inch, led disk lighting 6 In. Recessed Soft White LED Disk Light

LED Downlight/Disk Light Retrofit Kit Features & Advantages:

Compatible with 4"/5"/6" inch exsiting recessec can/housing and fit 4/5" Junction Box(J-Box)

UL and Energy Star Qualified

Retrofit Edison Base and Connector

Suitable for damp locations.

Dimming from 10%-100%

LED Downlight/Disk Light Retrofit Kit Ordering Info

USA 4"5" & 6" LED Downlight/Disk Light Retrofit Kit Parameters:

Model NO.	DK13DR4630KZ LED Downlight/Led Disk Light
Power	13W
Lumen	800lm
Voltage	AC120V
C.C.T.	2700K/3000K/4000K/5000K
C.R.I.	80Ra or 90Ra
Beam angle	100 degree
Power factor	0.9
Driver	Built-in UL Class 2 Driver
Base type	E26/Connector
Lifetime L70	35,000hr

 OUR Dimmable 4" 5" & 6" LED Downlight(Led Disk Light) Retrofit Kit Options

Dimmable 4" 5" & 6" LED Downlight/Disk Light Retrofit Kit Capability:

4" 5" & 6" LED Downlight/Disk Light Retrofit Kit Can Compatibility Sheet:

4" 5" & 6" LED Downlight/Disk Light Retrofit Kit Installation: 

Cans

 6" Can Installation with torsion spirng:

1.The disk light is ready to install with the springs put in the middle of screw holes.

2.Screw the E26 connector into the socket

3.Connect the orange male to the female connector and put the ground wire inside the can

4.Squeeze the springs to insert the fixture into the can and hook the on the inside of the can tabs.

5.Push the disk light up into the 6inch can

5inch Can Installation with torsion spring:

1. Loosen the springs from the disk light and turn them 180degree horizontally.

2. Place the springs onto the fringe screw hole.

3.Process to steps 2,3,4,5 of the 6inch can installation instructions.

4/5/6 inch cans with Mounting Clips:

1.Place the mounting clips onto the screw holes 4/5/6 inch cans respectively.

2.Proceed to step 2 and 3 of the 6inch can installation instructions.

3.Push the disk light up into the can and ensure that the mounting clips are firmly inside of the can.

4" & 5" LED Downlight/Disk Light Retrofit Kit Installation: 

J-Box

1.Use connector with hardwire to the disk light

1a,Remove the Trim, rotate the plastic lens counter clockwise to remove it

3.Open the plastic cap.

4.Insert the 2 screws(included) and align the disk light to the J-box. Use a scew driver to tighten screws.

5.Tighten screws, put plastic cap back and reattach the lens and trim.

Official Installtion Instructions, please ask for us.

Mester Led Lighting Optional

2. Shipping port: Shenzhen.

3.Mester Offers 3-5years warranty(Details pls ask for Warranty Term)

4" 5" & 6" LED Downlight/Disk Light Retrofit Kit Transportation: