Pipe ERW machine by High Frequency Roll Fomring machine from thickness 0.5-5mm

       Pipe ERW machine by High Frequency Roll Fomring machine from thickness 0.5-5mm

---------------------------------------------------------------------------------------------------------------

Basic information of stainless steel pipe for making machine:

Zhongtuo welded pipe machine adopts advanced welding technology and offers dual welding arcs, increased speed, higher deposition, superior mechanical properties and quality. HG50, HG 79 high frequency welded pipe machine is widely applied for producing tubes for heat exchanger, refrigerator, frame of car, bicycle, fitness equipment, furniture, cooling machine, petrol transmission, construction industry, etc. This high frequency welded pipe making machine or welded pipe mill composes of a complete set of pipe forming machine, rotating capstan, decoiler, straightening machine, shearing,accumulator, tube mill section, flying saw and packaging device. Now we have four types machines which are divided by wall thickness and diameter.

Pipe ERW machine Pipe ERW machine Zhongtuo stainless steel pipe for making machinefeatures:

1.Take continuous production,there is no need to change the rollers in rough-forming section.

2.The quality mill is reliable in the welding seam technology.

3.The pipe produced by welded pipe mill covers most ss pipes which are currently used by build

construction.

4.Straight seam welded pipe mill shares outstanding advantages such as low production cost and high production capacity.

Working flow in chart:

Main technical parameters:

Working flow in pictures:

Check details of the machine from the following pictures:

Check finished pipes from the following pictures:

Company Information

 

Principle of welding pipe machine:

For welding, it makes full use of two sciences-high-frequency current Skin Effect and  Adjacency Effect to make the current concentrate on the edge, then the temperature will reach to the point of welding. Then we can make the sheet to pipe by rolling and make the edge melting to one. 

This technology has the following features:

• It supports many kinds of material like carbon steel, GI and others.
• One machine could make a large range of pipe sizes by changing mold.
• One machine could be used to make square pipe, round pipe by changing mold. 
• High working efficiency but low energy consuming. 
• The pipe made by this kind of machine could be used in many areas like water tube, wire pipe and others.

Who need this kind of machine?

• If you want to run pipe factory or use pipe a lot, this machine is quite good for you.
• There is no pollution during using, and low electric consuming, so it is a kind of environmental friendly energy. 
• It is low noise and small space requirement, so you can run your factory at any place. 
• There is no waste water, waste gas, so it is totally clean technology.