Steel Hole Punching Machine / Flywheel Press Machine

1.

Decoiler      

It is used to support the steel coil and uncoil it in a turntable way.

Passive uncoil pulled by roll forming system.

Decoiler type: Manual

Loading capacity: 3T-5T

Uncoiling width: Max 1250mm

Inner diameter: 450-550mm

2. 

Flattener

The coil from Decoiler is a little bit curves, the leveling system is to help make the coil straight, neat and clear. We will take 11 rollers, upper 5 rollers and down 6 rollers to level the coil.

Leveling Rollers: 11 Rollers     

Diameter: 80 mm

Leveling thickness: 0.3-1.5 mm

Max leveling speed: 12 m/minute

Drive type: Gear

Motor power: 3 kw

3.

Punching Machine

Steel Hole Punching Machine / Flywheel Press Machine:

1. Press tonnage : 60T-200 T

2. Layout Form: Standing type

3. Size : 2.5*1.6*1.8 m (H*W*L)

4. Model No : J 21 (GANTRY TYPE)

5. Punching machine weight : 10 T

6. Power type: Electric power  

7. Voltage: 380 V 50 Hz 3 Phrase

8. Feeding power: 1.5 kw

9. Main motor power: 18.5 kw

10. Slider trip: 30 mm

11. Slide Strokes: 55-60 times/minute

12. Punching speed: 1.5-2.5 meters /minute

13. Feeding type: Automatic servo feeding (Automatic stop when punching)

4.

Cutting Feeder

The machine automatically stops when cutting. 

After the cutting, the machine will automatically start.

Feeding Rollers: 7 rollers    

Diameter: 80 mm

Feeding thickness: 0.3-1.5 mm

Max feeding speed: 12 m/minute

Drive type: Gear

Motor power: 4 kw

5.

Hydraulic Cutting

Automatic cutting controlled by PLC. It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start.

Material of blades: Cr 12 quenched HRC 58-60.

Power supply : Hydraulic power

Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, four hydraulic pipes and two sets of electromagnetism valves.

6.

Receiving Table

Table for reception of the cut profiles with roller transporter allowing to unload the cut profile freely.

Frame: Welded by square tube

Size: 2.0 m*1.0 m*0.9 m (L*W*H)

Supporter roller: ASTM 1045 with chrome

Diameter of rollers: 55 mm

Quantity: 3 Sets

Warranty

1. One year warranty, whole life technical support.

2. Installation & adjustment : We can take a video for the customer and the customer can also come to our factory, we can train customer how to install and adjust the machine.

3. Oversea service: the buyer should charge of visa, return ticket, food and accommodation overseas and USD 50/person/day salary.