Double Components Polysulfide- two component polysulfide sealant/silicone sealant/bulk sealant for sale

Double Components Polysulfide- two component polysulfide sealant/silicone sealant/bulk sealant for sale

2. Adjustable curing speed, inner harden fast, short maintenance cycle and mechanization sizing, conducive to the construction process.   

3. Non-corrosive to metal, coated glass and other materials, and has excellent adhesion and sealing performance to most building materials, and has good extensibility, water tightness and other functions. 

4. Products formed a cold resistant, heat resistant, no-corrosion elastomer after curing. High and low temperature resistant performance is outstanding. It will not become brittle, hardening or cracking after curing even in - 30 ℃. At +90 ℃, it will not become soft, degradation, but always maintain good elasticity.  

5. Part A is white and part B is black, mix part A and B with volume proportion 10:1, the mixture color is black. 

Main Function: 

1. Waterproof sealing of glass curtain wall, stone curtain wall (marble, granite), aluminum curtain wall and metal structural curtain wall.                            

2. Fixing and glazing of wind pressure resistant glass of automobiles and ship. 

3. This silicone sealant used for the second sealing of the insulating glass. 

4. Many other building and industrial uses.

1. Before smear, mix part A and part B. The user can change the mixing ratio according to actual needs to adjusted the curing speed (volume ratio between 8: 1-12: 1) 

2. Before using this product, should test the compatibility with contact materials first, when the performance is confirm qualified, construction can operate.
3. In the outdoor hot environment, the temperature of the substrate’s surface more than 40 ℃is not suit for construction.
4. The material surface contact with the structural adhesive must be clean and dry before the construction.

Construction Points: 

1. The material seeps oil, plasticizers or solvents, such as oil-soaked wood. 

2. Frost, wet surface. 

3. Continuous immersion in water or damp places throughout the year. 

4. The temperature of the surface below 4 ℃or higher than 40 ℃is not suit for construction. 

5. Part B can react with water vapor, so not exposure it in the air for a long time.  

1. Color: part A is white, part B is black, and the mixture is black. 

2. Package:part A 200L metal bucket (net capacity 190L), part B 20L plastic bucket (net capacity 19L). 

Transport and storage: 

This product is not easy to burn or explode, can be transported as the normal way. 

Products must be stored in a 27 ℃ blow and cool, dry place, the shelf life is nine months.