2000Meter LCD control remote waterproof & rechargeable electric dog collar

DT2000 electric dog collar

Product Description :

            DT2000  Remote pet  Training Collar is our 2014 newest long range remote dog training 

     collar . We designed new function in receive collar --- High light LED . When our sight is not

     good in forest , We can see the high light from 200~300 meter away and find out our dog

     easily . Details as below:

            1. Long range up to 2000 meter in open field.

            2. Train up to 3 dogs from the same transmitter

            3. 10 levels each of continuous and momentary stimulation

            4. 10 levels of vibrate funtion

            5. Highlight LED funtion , the pet can be find from 200~300 meter away in dark night

                6. “Buzz” sound activated with a separate button

            7. Two buttons “+” and “_” allow you to set your intensity

            8. Dog Selection button allow you to select your dog

            9. LCD digital display for 10 stimulation levels, vibrate levels and dog ID

           10. Memory functions for stimulation level in transmitter.

           11. Easy to operation with smooth button

           12. Water-proof transmitter and receiver , Dog can swim freely

           13. LED low power indication, red light flash when battery level is low.

           14. Fully functional multi-dog system

           15. 2-hour quick charging

DT2000 Dog training collar Spec

Product Details :

       1. DT2000 Remote pet Training collar Transmitter

“ +” and “-“ button: press these buttons to adjust the shock and Vibrate levels from 1 to 10

“On/Off” button: it is the power switch; 

“BZ” button: no-stimulation warning buzz

"Vibrate" Button: No hurt vibration

“Continuous Stimualtion” button: continuous stimulation .

“Momentary Stimulation” button: momentary stimulation .Press button ,only emit one static shock

“A,B,C ” button: dog selection switch , The default is “A”. You select A dog, LCD display dog ID

“A XX”. If you want to train B dog, press “B” button , LCD will display “BXX” If you want to train C

dog, press “C”button again, LCD will display “C XX”. The "XX" is show the shock & vibrate level .

High-Light operation: After matched with receive collar , When press and hold on "A" button , A

dog receive collar will high-light flash . Press and hold on "A" button again , Can quit the high-light

flash.

Momoreize shockand Vibrate level : The Transmitter will memorize the shock level . When you

power off the transmitter , then turn it on .The different shock and vibrate level will show in transmitter.

Transmitter Charging: The LCD display “CHA” when charging. The LCD display “FUL” when the

transmitter is full charged . The LED light will flash if the battery is low

  2. DT2000 Remote pet Training collar Receiver 

LED Light: Indicate the working status, Low battery ,Charging status and full charging status

On/Off Button:Press and hold 4 seconds to turn the collar on/off. 

DC Jack : Charging receive collar by 5V1000mA DC adaptor , Car Travel Charger or other 5DC

power supply .

Receive collar charging : The Charging LED become red light when charging .The Charging LED

become green when the receiver is full charged. The red Led will flashes if the battery is low.

The high-light LED will flash and we can find out the LED light through the translucent case

FAQ:

         Problem#1: No stimulation when a transmitter button is pressed.

         The receiver has not been activated. The receiver must be turned on or it won’t work at all

         The receiver has not been set to your transmitter. Follow the instruction on page6.

         The batteries in either the receiver or the transmitter are dead. Recharge or replace, as needed.

         You are using the wrong transmitter. Check the transmitter.

         Problem#2: The stimulation seems to high, not high enough or no feeling at all

         The collar strap is not tight enough. Make sure the contacts points connect the dog’s skin well.

         The intensity level is not correct. Change the shock level.

         The batteries are dead. Recharge as needed.

         Problem#3: The Remote Trainer doesn’t have range or the range is significantly reduced.

         Either you or the dog is shielded by a metal structure. Operate it far away from these structure.

        The receiver is on backwards. For best range, position the receiver so that the light face toward the  

        dog’s nose.

        Radio Interference. Wait a short while then try again, or move to another area.

Packing: