1200 meter multi-dog training system hunting device

DT1200 hunting device

Product Description :

               DT1200 Remote dog training collar is a long range multi-dog training system. It is very suitable  

      for dog traing, hunting . We provide Car Travel Charger . You can charge this system in car easily .

        1.  Long range up to 1200 meter in open field.

         2. Train up to 3 dogs from the same transmitter

         3. 10 levels each of continuous and momentary stimulation

         4 . “Buzz” sound activated with a separate button

         5 . Two buttons “+” and “_” allow you to set your intensity

         6 . Dog Selection button allow you to select your dog

         7. LCD digital display for 10 stimulation levels and dog ID

         8.  Memory functions for stimulation level in transmitter.

         9. Easy to operation with smooth button

         10. Water-proof transmitter and receiver ,Dog can swim freely .

         11. LED low power indication, red light flash when battery level is low

        12.  2-hour quick charging

DT1200 Remote dog training collar spec

Production Details :

         1. DT1200 Remote dog training collar  Transmitter

 “ +” and “-“ button: press these buttons to adjust the shock intensity from 1 to 10 levels

“On/Off” button: it is the power switch;

“BZ” button: no-stimulation warning buzz

“Continuous Stimualtion” button: continuous stimulation .

“Momentary Stimulation” button: momentary stimulation .Press button ,only emit one static shock .

“A,B,C ” button: dog selection switch , The default is “A”. You select A dog, LCD display dog ID

“A XX”. If you want to train B dog, press “B” button , LCD will display “BXX” If you want to train C

dog, press “C”button again, LCD will display “C XX”. The "XX" is show the shock level .

Momoreize shock level : The Transmitter will memorize the shock level . When you power off

the transmitter , then turn it on .The different shock level will show in transmitter.

2. DT1200 Remote dog training collar Receive collar

LED Light: Indicate the working status, Low battery ,Charging status and full charging status

On/Off Button:Press and hold 4 seconds to turn the collar on/off.

DC Jack : Charging receive collar by 5V1000mA DC adaptor , Car Travel Charger or other 5DC

power supply .

Packing:

FAQ:

Problem#1: No stimulation when a transmitter button is pressed.

The receiver has not been activated. The receiver must be turned on or it won’t work at all.

The receiver has not been set to your transmitter. Follow the instruction on page6.

The batteries in either the receiver or the transmitter are dead. Recharge or replace, as needed.

You are using the wrong transmitter. Check the transmitter.

Problem#2: The Beeper of Receiver doesn’t make any sound when the Receiver is turned on.

The battery in the Receiver has run down. Recharge as needed.

Loose battery connection. Send to sevice center to replair .

Problem#3: The stimulation seems to high, not high enough or no feeling at all

The collar strap is not tight enough. Make sure the contacts points connect the dog’s skin well.

The intensity level is not correct. Change the shock level.

The batteries are dead. Recharge as needed.

CE: