Six color rotary screen printing machine manual

Product video:     /watch?v=uAytzEFuskE

6 color manual t shirt screen printing machine

t shirt screen printer machine
screen printer for t shirt machine
manual screen printer machine
Manual 6-color Screen Garment Printer:

1. Widely suitable for screen printing tshirts, garments, towel, lether,umbrella and backpack, etc.

2. The printing base and screen can be rotated, and screen plate can turn backward and forward, left  and right, which makes the operation easier and postitioning more accurate.

3. Used for printing with heat set ink, rubber cement and other printing inks

Parameters:

1. Printing area: about 40x50cm

2. Working table area 500X600mm

3. Screen frame area 600x650mm

4. High capacity  960pcs/hr

5. Packaging volume: 2.2Square

6. NW:about 320kg

Feature

The textiles color printing machine occupy the space is small, involving fewer manpower, and it’s easy to print color. It is widely used in clothing, CD fabric, bags, umbrellas, leather, etc. Table plate can be moved around, and the screen can also be around, the front screen can be adjusted.Easy adjusting - Mesh frame can be precisely set to correct position by turning screws of adjusting system on printing head.

Color steel press with stand.

• Rotating base and brass bushings.

Consistent front, back, left, right, high and low makes it easy to use for multiple color prints.

There is literally no maintenance.

The head comes assembled & ready to attach to the base.

Location lock that helps lock the arm in place while in the printing position.

All Tubular Steel Construction.

Adjustable Screen Tension Hold Down.

Remark

1, install support arm on the 4/6/8 working tables. Please do not twist the 4 screws too tight,until the 4 /6 /8screen arm all put down, and put the 6 plates fixed in support arm, then twist the screws tight

2, install the screen plate, then debug the distance and according to the printing requirements to adjust.

Screen printing is a printing technique that uses a woven mesh to support an ink-blocking stencil. The attached stencil forms open areas of mesh that transfer ink or other printable materials which can be pressed through the mesh as a sharp-edged image onto a substrate. A fill blade or squeegee is moved across the screen stencil, forcing or pumping ink into the mesh openings for transfer by capillary action during the squeegee stroke.  

Screen printing is also a stencil method of print making in which a design is imposed on a screen of polyester or other

fine mesh, with blank areas coated with an impermeable substance, and ink is forced into the mesh openings of the mesh by the fill blade or squeegee and onto the printing surface during the squeegee stroke. It is also known as silkscreen,serigraphy, and serigraph printing. You can also have more than one colour printing, for example you could have a striped printing.

Printing technique

A screen is made of a piece of mesh stretched over a frame. A stencil is formed by blocking off parts of the screen in the negative image of the design to be printed; that is, the open spaces are where the ink will appear on the substrate.  

Before printing occurs, the frame and screen must undergo the pre-press process, in which an emulsion is 'scooped' across the mesh and the 'exposure unit' burns away the unnecessary emulsion leaving behind a clean area in the mesh with the identical shape as the desired image. The surface (commonly referred to as a pallet) that the substrate will be printed against is coated with a wide 'pallet tape'. This serves to protect the 'pallet' from any unwanted ink leaking through the substrate and potentially staining the 'pallet' or transferring unwanted ink onto the next substrate. Next, the screen and frame are lined with a tape. The type of tape used in for this purpose often depends upon the ink that is to be printed onto the substrate. These aggressive tapes are generally used for UV and water-based inks due to the inks' lower viscosities. The last process in the 'pre-press' is blocking out any unwanted 'pin-holes' in the emulsion. If these holes are left in the emulsion, the ink will continue through and leave unwanted marks. To block out these holes, materials such as tapes, specialty emulsions and 'block-out pens' may be used effectively.  

The screen is placed atop a substrate. Ink is placed on top of the screen, and a floodbar is used to push the ink through the holes in the mesh. The operator begins with the fill bar at the rear of the screen and behind a reservoir of ink. The operator lifts the screen to prevent contact with the substrate and then using a slight amount of downward force pulls the fill bar to the front of the screen. This effectively fills the mesh openings with ink and moves the ink reservoir to the front of the screen. The operator then uses a squeegee (rubber blade) to move the mesh down to the substrate and pushes the squeegee to the rear of the screen. The ink that is in the mesh opening is pumped or squeezed by capillary action to the substrate in a controlled and prescribed amount, i.e. the wet ink deposit is proportional to the thickness of the mesh and or stencil. As the squeegee moves toward the rear of the screen the tension of the mesh pulls the mesh up away from the substrate (called snap-off) leaving the ink upon the substrate surface.  

There are three common types of screenprinting presses. The 'flat-bed', 'cylinder', and the most widely used type, the 'rotary'.  

Textile items printed with multi-colour designs often use a wet on wet technique, or colors dried while on the press, while graphic items are allowed to dry between colours that are then printed with another screen and often in a different color after the product is re-aligned on the press.  

Most screens are ready for recoating at this stage, but sometimes screens will have to undergo a further step in the reclaiming process called dehazing. This additional step removes haze or "ghost images" left behind in the screen once the emulsion has been removed. Ghost images tend to faintly outline the open areas of previous stencils, hence the name. They are the result of ink residue trapped in the mesh, often in the knuckles of the mesh (the points where threads cross).  

While the public thinks of garments in conjunction with screenprinting, the technique is used on tens of thousands of

items, including decals, clock and watch faces, balloons, and many other products. The technique has even been adapted for more advanced uses, such as laying down conductors and resistors in multi-layer circuits using thin ceramic layers as the substrate.

Stenciling techniques

A method of stenciling that has increased in popularity over the past years is the photo emulsion technique:  

1.The original image is created on a transparent overlay, and the image may be drawn or painted directly on the overlay,photocopied, or printed with a computer printer, but making so that the areas to be inked are not transparent. A black-and-white positive may also be used (projected on to the screen). However, unlike traditional platemaking, these screens are normally exposed by using film positives.  

2.A screen must then be selected. There are several different mesh counts that can be used depending on the detail of the design being printed. Once a screen is selected, the screen must be coated with emulsion and put to dry in a dark room.Once dry, it is then possible to burn/expose the print.  

3.The overlay is placed over the screen, and then exposed with a light source containing ultraviolet light in the 350-420 nanometer spectrum.  

4.The screen is washed off thoroughly. The areas of emulsion that were not exposed to light dissolve and wash away,

leaving a negative stencil of the image on the mesh.  

Another advantage of screenprinting is that large quantities can be produced rapidly with new automatic presses, up to 1800 shirts in 1 hour. The current speed loading record is 1805 shirts printed in one hour, documented on 18 February 2005.Maddie Sikorski of the New Buffalo Shirt Factory in Clarence, New York (USA) set this record at the Image Wear Expo in Orlando, Florida, USA, using a 12-colour M&R Formula Press and an M&R Passport Automatic Textile Unloader. The world speed record represents a speed that is over four times the typical average speed for manual loading of shirts for automated screen printing.

Versatility

Screenprinting is more versatile than traditional printing techniques. The surface does not have to be printed under

pressure, unlike etching or lithography, and it does not have to be planar. Different inks can be used to work with a

variety of materials, such as textiles, ceramics, wood, paper, glass, metal, and plastic. As a result, screenprinting is

used in many different industries, including:

Balloons  

Clothing  

Decals  

Medical devices  

Printed electronics, including circuit board printing  

Product labels  

Signs and displays  

Snowboard graphics  

Textile fabric  

Thick film technology

Screen printing press

To print multiple copies of the screen design on garments in an efficient manner, amateur and professional printers usually use a screen printing press. Many companies offer simple to sophisticated printing presses. Most of these presses are manual. A few that are industrial-grade-automatic printers require minimal manual labor and increase production significantly.

Analysis of screen printing trends and prospects

screen printing market space

China from the 20th century, 80 years, the speed of screen printing materials, equipment, technology research and

development, so that screen-printing with flexo printing, offset printing, gravure played an advantage in competition. Rate of 7% annual increase. Currently there are about More than 70% of the wide format color screen printing with spot-color printing, nearly 30% using four-color overprint, and the proportion of four-color overprint is still increasing steadily. Industry survey showed that 70% of the annual output value of enterprises 100 million. But China's current total output value of the printing screen printing production value less than 2%, which have great potential to be tapped and broad development prospects.

Survey, the national screen printing ink usage is 2-year million tons, of which about 54% of the imported products; mesh year with about 10 million meters, of which about 62% of the imported silk screen, light-sensitive plastic consumption is about 4300 years tons, of which about 57% of imported products. The more large-scale screen printing factories in the greater proportion of imported products.

screen printing machine manual

used rotary screen printing machine

manual cylindrical screen printing machine

The next screen printing will remain a high growth rate will gradually increase the technical, industrial scale will be

further expanded. Authorities predicted that the future world production of screen printing in the printing share of GDP will rise to 10%. There is no doubt that China Screen Printing Industry is being nurtured the development of a larger space and potential market. Expected that by 2005 China will become the world's largest screen printing market. China screen printing in the future will be depth and breadth. "Deep" is to a higher level of development, international screen printing industry has long been widely used in computer design, plate making, carving and other advanced electronic technology, and our country for these new technologies are still in the research trial stage; "well" is the development of new screen printing products, such as outdoor advertising and other large-scale screen printing.

screen printing applications

Survey shows that China Screen Printing Industry and the number of kinds of products sorted by manufacturers as follows:signs and panels, textiles and garments, plastic sheets, advertising materials, printed circuits, light boxes and so on.Emerging field of screen printing to an extraordinary rate, such as building materials, the system card, CD-ROM, security printing and so on.

screen printing machine manual

used rotary screen printing machine

manual cylindrical screen printing machine

1. Ad print

Screen Printing in commercial advertising, there will be more market, some large companies, especially electric companies,tobacco companies promote their image in order to attach great importance to the role of advertising. Advertising time and to some extent determine the quality of the company's share of the market. Therefore, all kinds of electrical advertising,packaging and advertising, outdoor advertising, commercial ads to screen printing provides a broad space. In the commercial competition, because the large-scale outdoor advertising a wide field of vision, effective and taken seriously. So, as our screen printing large color outdoor ads along with the development of commercial advertising, the increasing volume showed large, cheap, colorful, save a long period, and fast delivery advantages, more and more cities are planning departments,advertising approved by regulatory agencies, attracting a lot of advertisers.

screen printing machine manual

used rotary screen printing machine

manual cylindrical screen printing machine

2. Packaging and Printing

Packaging industry is the main service screen printing industry, target, screen printing technology continues to develop applications, will better serve the packaging and decoration industry, for packaging and decoration industry, while contributing to a more prosperous, but also for silk screen printing industry.

screen printing machine manual

used rotary screen printing machine

manual cylindrical screen printing machine