precast boundary wall machine made of stainless steel

precast concrete boundary walls machine:

1. High quality

Our machine frame is high-quality steel, inside mould is made of 6mm stainless steel which is more wear-resistant and easy for de-molding. Besides, the staineless steel can make the surface of the wall panels smoother.

2. Large capacity

One machine can make 15 pieces of panels per cycle.

3. Easy to use

The machine has hydraulic opening and closing system which is easier to use.

4. Special design

4.1 The mixer is specially designed for the production line. It has large capacity and can fill in the moulds very fast and easily.

4.2 The male and female grooves are disgned well and very easy to use and can form good shape of the panels.

4.3. Special design of the side mould.

5. The machine can be fixed or movable according to the customers' requirement. Movable machines uses rechargable batteries. The machines are remote-controlled, it can save both labor and electricity and very safe to use.

precast concrete boundary walls:

Panel size: 2400mmx600mmx75/90/100/120/150/180mm or according to the customers' requirement.

Material: cement, fly ash, perlite or Mgo, Mgcl2 or according to what the customers have in their country.

We are professional manufacturer of different kinds of lightweight wall panel machines----stainless steel precast concrete boundary walls machine, eps concrete sandwich wall panel machine, ceramsite block machine, fence wall panels made of construction waste etc. Our advantage is that we not only make the machines, but also make the panels, so we have rich experience.The most important part of our advantage is not only about the machine, but also about the formulation. How to make the best-quality panels at the lowest price according to the materials which the customers have in their countries is our main purpose. We can make the best formulation  for our customers because we have rich experience in this field. The materials of making this kind of panels can be cement, fly ash, leca, perlite, eps, gypsum, Mgo, Mgcl2, wood saw powder, crushed plant straws, etc.

We assign technicians for the installation of the precast concrete boundary walls machine. We prepare enough quick-wear spare parts for the customer. We will help train technicians until the buyer can run the line by themselves. We will also give our customers the best formulation to ensure make the best-quality panels at the lowest cost. If there is anything wrong with the machine because of the machine quality, our technician will go to repair it without any charge. 

 We put small parts into cartons. For big machine body, there is no packing. The following photos are about loading in our factory:

Q1: How long is the curing time?

 A1:If you use normal portland cement, the curing time is around 5 hours. If you use Mgo, the curing time is only 2 hours.

Q2: How many labors are needed for the production line?

A2: Five labors are enough.

Q3: Can the machine make other kinds of panels?

A3: Yes, it can. It can make sandwich panels, too. Please see the following photo for reference.We can also design the right machine to make panels according to customers' requirement. 

  skype: swjallen1

 qq: 719411643

 mobile: +86 135 7356 0091

 whatsapp: +86 135 7356 0091