cell phone security display holder

1.Can be Alarm and charging. 
2.Break, short circuit and comprehensive security . 
3.Infrared password to unlock . 
4.Display Angle of 60 degrees,Perfect show.
5.Fanshional Look with Elegant Design

SPECIFICATION

Operation Steps :

Charge for the display stand with the adaptor connected.(Led indicator turns red when charging and turns off when fully charged)

Turn ON the button at the bottom of the display stand.

Write code by pressing on the button on decoder, which should be aligned with Signal receiver port within 15mm (a prompting sound would be emitted when being activated).

Tear off the 3M sticker at the bottom of display stand.

Stick the display stand on clean desktop (keep pressing for more than 10 seconds).

Tear off 3M sticker adhesive on connector cable, to which make the displayed stand adhered. (keep pressing for more than 10 seconds)

Plug contactor cable into contactor cable port of the display stand.(The display stand emits a “DD” sound and the LED light flashes blue at the interval of 5 seconds indicating the alarm works.)

Optional parts:

Micro charging cable

iPhone 5 charging cable

Product Installation:

Click the switch and you can turn on the security display stand

Tear off the 3M adhesive tap,and then paste the exhibitions or the stands

Alarm solution

when alarm,the green indicator light will turn red immediately.Use the infrared decoder to

send signal to the host, within 5mm, press “unlock”, and the host indicator light turn off.