transparent led film,Konida Medical laser blue film

Specifications

 Medical Laser Blue Film(KND-K)has image layer and protect layer on different side of thinner blue polyester bases, and there are no sensitive silver halide in both layer. The film is fit for laser printer to print digital image which is processed and stored in the computer, to attain the enhanced x-ray image quality. Compared to traditional silver halide processing, the procedure is more convenient and the speed of processing is faster. Meanwhile, it reaches to the goal of environment protection because the whole procedure is free of the Chemicals.

The image published by this film is of low fog, high-sharpness, high max density, and bright tone, it can be used directly on KONIDA laser printers.

Features

Waterproof, wearable, easy to store

Scratch-resistant, can be stored for years with high quality

Signable, can be signed directly on the surface

The film base has excellent degradability.

Translucent coating,wathet blue and not easy to tear.

Processing

The product can be directly printed with Konida laser printers KND-DRYTEC-3000 or KND-DRYTEC-4000 to get ideal image.

Storage

The original packaging should be stored in dry, cool, clean rooms, and should prevent from direct sunlight, acid-base gas.

Specification requirements are below.

1. Temperature, humidity: Temperature 10-23 centigrade;

Relative humidity 30-65 percentages, store far away from heat source.

2. Gas: The storage room must not have hydrogen sulfide, ammonia, sulfur dioxide and formaldehyde such acid gases.

3. Pile, Please keep film upright to avoid the bad influence caused by pressure. 

Period of validity

The period of validity is 30 months under above environment.

Conditions of usage

The best condition of usage as following
Temperature 18°C~24°C, humidity 50%~65%RH.T

Notes

1. Store the film under the conditions specified above.

2. Take the film out of the cool place and place the film with the package in the place where the film will be used for at least 4 hours, to avoid the steam concentrate on the film and damage the film.

3. It should be careful to handle the film, don’t crash, fold, distort and rub the film, don’t touch the film with wet hand.

4. Dealing with the waste film should obey the local law and regulations.

Package and Size

1.Konida Medical Laser blue film KND-K, Suitable for Konida laser printer KND-DRYTEC-3000,KND-DRYTEC-4000.

Reference

Printed medical laser blue film(KND-K)

Factory

Related devices

Attending exhibition

Package