Isolation RS232/485/422 Converter and Repeater

1. Support DIN-rail, Terminal block connection
2. 12~36VDC Power input(3 bit terminal block)
3. Adopt itself adapt interface technique, no use for setup switch
4. Adopt ADDC, auto distinguish and data transfer direction.
5. Can use for RS485/422 repeater and RS232 to RS485/422 converter, but just use one function at same time
6. Supply 3000V optic-electrical isolation, 1500W surge protection
7. Reach up to 3000m at the rate of 9600bps

RS232 signal: TX, RX, GND
RS485 signal: D+, D-, GND

RS422 signal: T+, T-, R+, R-, GND

Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
Flow control: Data direction auto-turnaround, no flow control is required
Transfer distance: RS485/422 side:3Km(9600bps)
                                  RS232 side: no less than 5m
Max number of drops: 128 nodes
Optical isolation: 3000V
Port protect: 1500W surge protection,15KV ESD protection
Connector: RS232 side DB9 female
                    RS485/422 side 5 bit terminal block

Power input: 12~36VDC power input
3000V Isolation

Dimensions: 100.0mm×69mm×22.0mm 
Material: Iron(shell)  
Color: White   
Weight: 280g

1.RS232/485/422 Converter and Repeater SW485GI× 1
2. User manual × 1

3. Certificate of quality × 1
4. Warranty card × 1

5.Power adapter  × 1