18 ports Managed Gigabit PoE switch ( 16-port 10/100/1000M PoE + 2-port Gigabit SFP )

1. Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can supply power to PDs under these two standards
2. Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs)
3. Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard POE devices or devices without POE function
4. Support port power supply prioritization, guarantee the continuous power supply of key nodes
5.Up to 100m network cable transmitting distance
6.Built-in PSE power supply module, plug-and play  design, easy to install
7. High security performance defending against power surge
8.Support short-circuit protection function
9.Energy-saving green design, support auto-switch to standby mode and auto-detect cable length.
10.Support simple WEB management, easy to configure the functions of switches

Switch

Properties

Transmit mode: Full wire-speed storage and forwarding

10M forwarding rate: 14880pps

100M forwarding rate: 148810pps

1000M forwarding rate: 1488100pps
MAC address: 16K, Support auto-update, two-way learning
VLAN: Support up to 4096 VLANs, Port-based VLANs, VLANs based on IEEE 802.1q
Switching Capacity: ≥36Gbps
Spanning Tree: Spanning Tree Protocol,

Rapid Spanning Tree Protocol(RSTP),          
Link Aggregation:Support 8 aggregation groups, and a maximum of 4 ports in each aggregation group
Ring Protection:Support Ring Protection, provide real-time detecting, quick alarm, precise localization, smart blocking and auto-recovery
Port Isolation: Isolation between downlink ports without influence the communication between downlink and uplink ports
Port Flow Control: Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode
Port Rate Restriction: Port-based ingress or egress rate limiting
Jumbo Frame: Maximum supports 9216 Byte
Storm Suppression: Support the suppression of broadcast storm based on forwarding rate
Multicast Control: Support IGMPv1/2/3 and MLDv1/2 Snooping;
Security:Port-base MAC address binding,Security restriction on port-based MAC address quantity
QOS: SP(Strict Priority), WFQ (Weighted Fair Queuing), WRR (Weighted Round Robin), 802.1p(Port Queuing Priority), Differentiated Service Code Point(DSCP Priority)
IPv6:IPv6 Parsing
PoE ouput priority Management: Supported

Fixed ports:  16*10/100/1000M PoE ports+2* Gigabit SFP ports
POE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+),7/8(-)

10/100Base-TX:UTP category 3/4/5 cables( Maximum 100m)
1000Base-T:UTP Category 5 cable( Maximum 100m)
1000Base-SX:fiber with 850nm wavelength,supports a max transmission distance of 550m
1000Base-LX: fiber with 1310nm / 1550nm wavelength, supports a max transmission distance of 80km
Network Cable Deployment: Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable 
Negotiation Pattern: Support port auto-negotiation function ( automatically negotiate transmission rate and Duplex modes)
Maintenance: Detect the connectivity of network cables,Uploading or downloading of the configuration data,Uploading of upgrade patch, WEB-based reset to factory defaults, Support port short-circuit reset to factory defaults
Management: Support WEB-based management

Interface light: Link/Act, POE Status
Power light: PWR

Input Power Supply: 90~264VAC / 50~60Hz / 300W
Energy Saving:Comply with “EEE” Energy Efficient Ethernet 

Shell: metal shell
Size(W×H×D): 440mm×285mm×44.5mm

Weight:3800g

Installation: Desktop mounting

1.18 Ports Managed Gigabit PoE switch ES5018G-2GS-16POE  × 1
2. User manual × 1

3. Certificate of quality × 1
4. Warranty card × 1

5.Power line  × 1