10/100M Ethernet to E1 Protocol Converter(Model7211)

Features

1) Using E1 line transparent transfer Ethernet data;

2) Support local clock and line clock;

3) Support pretend random coding loop test;

4) E1(G.703)interface support 120ohm(RJ-45)and 75ohm(BNC double coaxial);

5) Ethernet MAC address percolate function;

6) Support VLAN over length data bag;

7)Ethernet port support 10M/100M full-duplex/half-duplex.

Introduction

MODEL7211 bridge provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface. Can used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex. The E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request. A pair of MODEL7211 offer a cost effective solution for using existing E1 leased lines for transparent Ethernet service. Local management of the MODEL7211 Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link, Ethernet LAN and serial ports for status and Loss of Sync. MODEL7211 compact G.703 Access Converter provides E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package. MODEL7211 terminates the G.703 Telco interface and converts the data for transmission to a user-oriented 10/100BaseT(x) interface.

Specification

E1 Interface

Standard                                  Comply with ITU-T G.703

Output tingle displace           accord ITU-TG.735 advice

Input tingle limit                      accord ITU-TG.823 advice

Output tingle                            accord ITU-T G.823 advice

Frame format                          unframed

Interface rate                           2.048Mbps

CRC checkout                        no

Port coding                              HDB3

Port transmission                  2KM

Port protection                        1500V electromagnetism isolate

Port connector                        120 Ohm(RJ-45) and 75 ohm(BNC double coaxial)

Ethernet Port

Interface Types                         10/100BaseT, full/half duplex

Standards Compliance           IEEE 802.3

Bit Rate                                      10/100BaseT limited to Max 2.048 Mbps

Connectors                               RJ45 (10/100 Base-T Electrical)

Line code                                  Manchester Encoding

Internal and recover clock

Environment, Power and Dimension

Working temperature         -25 to 70°C

Storage temperature          -40 to 85°C

Humidity                                Relative humidity 5% to 95%

Input power                           220VAC or -48VDC

Consumption                       2W

Power protection                 From high voltage/short circuit

L×W×H                                  227.4mm×146.3mm×42.7mm

Shell                                      Plastic

Weight                                  260g

Warranty time               5 years

Certification                   CE,FCC, RoHS

Packing List

1) 3onedata Protocol Converter Model7211×1

2) 220V power line ×1

3) User manual×1