10 Gallon Sand Blaster, High Quality Sand Blaster For Sale! Quality Choice

10 Gallon Sand Blaster Model Nr.:SB-10 

Specification:
Equipped with a nozzle and shut-off valve,pressure gauge,ceramic
nozzle,2.5mm,hose,filling funnel,watertrap,6" rubber wheels and
can vas hood.
Tank Dimensions:12" Diameter,20"Length
Overall Dimension:83cm(H)*48cm(L)*33cm(W)
Hose length:2.5M
Work pressure: 60-125PCI&6-25CFM
Tank volume:10G

Package details:
Pcs/Ctn: 1
G.W./N.W.: 19/17kgs
Dimension: 19*42*37cm
Q‘TY/20': 240pcs
Q‘TY/40' : 500pcs

WARNING: To reduce the risk of injury, always protect eyes and face with goggles and mask, and hands and arms with heavy work gloves when spraying abrasive materials.

Place the sand blaster induction probe in the sand supply container.

How To Sandblast :

1.    Connect and open the water supply line before starting the pressure washer.

2.    Trigger the gun to relieve the air in the equipment.

3.    Start the pressure washer. See its instruction manual.

4.    Trigger the gun to activate the spray.

CAUTION: Always test spray on a scrap of similar material first! The high pressure spray could damage the surface if the sandblaster is held too close. See step 5 below.

5.    To check the distance you will need to hold the spray nozzle from the surface, start to spray at the scrap of material from a distance of several feet. Gradually move closer, checking frequently to see if the high pressure spray is damaging the surface.

6.    See the application below for the type of sand recommended for your work surface.

Always point the nozzle downward when not spraying. This prevents water from entering the sand supply. If water does get into the sand supply hose, remove the probe from the sand, hold the gun trigger open, and let the hose air dry. Always be sure the sand hose is dry before using.

Keep the sand covered to prevent the overspray from wetting the sand. Do not allow small pieces of the sand bag to fall into the sand supply. A smaller piece could prevent the flow of sand.

Cnjacks' Sand Blaster Models Review

 Cnjacks Sand Blaster Workshop View