straw wave glazed roof tile machine

Specifications

   straw wave glazed roof tile machine

Straw color roof tile forming machine can produce pantile with all kinds of waves and heat-preserving layer, which will be used at the roof as the substitute of traditional asbestos tile, color steel tile and cement tile. There is asbestos in the asbestos tile which include carcinogen. 

Product features:

The product manufactured by this equipment has following features: fireproof, waterproof, environmental protection and no toxicity, at the same time it is resistant against acid, alkali and aging. This product can be nailed, planed, sawed and sticked. In view of that its fireproofing grade is A, so our product will not be combustible when the fire is 800-1000°C.At the same time, when our product is fell into the water for a week, there are not the following phenomenon such as chalking, deformation and warp. In light of there is not glue in the raw materials, so there is not formaldehyde and benzene for our boards.

Rich color and never fading

Technology features

This machine adopts reverse in-phase running technology.

There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.

Equipment Model and Product Specification

According to different production, our equipment has 6 models for large-scale, middle-scale and small-scale. Our all equipment can produce board with same quality and specification but different production.

Customers can adjust the specification of the pantile according to different requirements, the standard specification is 1.8mX0.72m, the biggest length is 6 m, the thickness is 3mm~6mm generally. In addition, this equipment can produce the pantile with heat-preserving layer.