TOP quality !!! high performance high security pre-dsale tracking servicel Universal EEPROM programmer 

 Introduction

If you brush satellite receiver, choose the generic SPI professional programmer, supports almost all of the SPI memory, takes all the various SPI chip, support: F80, F80-100, M8, M16, 25L8005, P8075CG satellite receiver on the other special chips that can relieve a variety of chip protection.

Short description:

• 6951 supported devices by 2.67 version of SW (25. Feb. 2010)
• small and powerful portable programmer of all 8-pins serial EEPROMs
• supports interfaces IIC (24Cxx), Microwire (93Cxx), SPI (25Cxx)
• supports programming LV (3.3V) EEPROM
• comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
• free SW update, download from Internet
• approved by CE laboratory to meet requirements
• connection to PC - via printer port
• power supply, cable and SW included

• The programmer is universal programmer of all types of serial EEPROMs in 8-pin package. It enables programming EEPROMs with interface types IIC (24Cxx), Microwire (93Cxx) and SPI (25Cxx). Programmer supports programming LV EEPROMs (3.3V). The programmer is equipped by ZIF socket. The quality of programmer is completed by comfortable control program. SEEprog is computer peripheral, it is connecting to PC via standard parallel port.

Socket and control of pins:

• ZIF (Zero Insertion Force) DIL zocket (300mil wide)
• each pin is possible to set in position Low and H/Pull-up
• from each pin is possible to read
• support of Low Voltage devices

Supported devices:

• EEPROM I2C (24Cxxx)
• EEPROM Microwire (93Cxxx)
• EEPROM SPI (25Cxxx, 25LVxxx, 25Fxxx, 25Pxxx)
• Configuration (EE)PROM: AT17xxx, LV series including
• speciall devices (digital thermometers, ...)

Device operations:

• standard: blank check, read, program, verify, checksum

Supported file formats:

• Binary
• HEX:Intel, Intel EXT, Motorola S, MOS, Exormax, ASCII - SPACE - HEX

PC system requirements

• Programmer hardware related requirements:
  • one (parallel) printer port with nothing attached, the printer port on PCI bus recommended

General:

• operating voltage 8..15V DC, max. 50mA
• dimensions 137x65x40 mm (5.4x2.6x1.6 inch)
• weight (without external adapter and connecting cable) ca. 150g (5.295 oz)
• temperature range: 5°C ÷ 40°C (41°F ÷ 104°F)

Package includes

• Universal Serial EEPROM programmer
• wall plug adapter, 12V DC/500mA, unstabilized
• connection cable PC-programmer
• software
• user manual (on CD)
• transport case (cardboard box)