PRODUCT DESCRIPTION                                                                                           

    PRODUCT INFORMATION                                                                                        

 Operation Guidance

1.Fill the tub with approximately 2 litres of warm water,please note that if water level is not high enough,none of the 

   functions will operate(A beeping alarm will be heard after the power is turned on ,and the red"Add water"indicator

   light will show)  Add any hand soak or similar products as desired.

2.Place Hand Spa on a stable,level surface where the client can access it easily and comfortably.

3.Ensure power is connected and available.

4.Press "Power on/off" button .A beep will be heard and the red indicator light will show.

5.Select Light.Water Massage and Ozone/Aeration as required by presssing the corresponding button,A beep  will

   be  heard and the red indicator light will show.Turn any of these functions off by pressing te relevant button again.

6.Please note that to activate  a stronger bubbling massage.the "ozone/aeration"function must be selected.The "Water

   Massage"function  on its own produces a low flow of citculating water only.

7.When selected,the LED lights will alternate red,green and blue.

8.The Temperature (of the water)will automatically display 40 degress C .It may be adjusted between 40 and 50 

   degrees by pressing the temperature +or -buttons,While the water is heating up to the selected temperature.the 

   red "Heat"indicator light will show .When the correct tempetaure has been reached ,the indicator light will go off.

9.If any malfunction occurs in the Temperature operation."E1"will show in the temperature display,and the unit will 

  turn off. If this happens,please contact your local comfortel office.

10.The hand spa will operate for 20 minutes before turning off automatically.

    DETAILED IMAGES                                                                                                    

     ABOUT US