Stand Cheap hot facial steamer for Cleaning facial beauty machine with CE D-280

PRODUCT DESCRIPTION                                                                                         

   PRODUCT INFORMATION                                                                                        

 Facial steamer

  The basic concept of this machine is that it uses electronic heat to boil water for producing steam. And then it uses the

  ultraviolet lamp to decontaminate the steam. Finally it passes the sterilized steam to skin where needs to be cared. The

  special feature of this machine is that it has an aromatic oil container for beautician to operate easily and conveniently.  

  Its smooth and beautiful shape, high-tech parts, flat tube can be turned in all degrees, arm can be turned up and down

  at 80 degrees, aromatic oil container ....etc.

 Facial steamer Features

 duct # machine and computerized.
 2.timer.(up to 30 minutes).
 3.5 minutes consumed from power on to steam made.
 4.arm can be turned up and down at 80 degrees, flat tube can be turned at all degrees.
 5.heater wattage:650W
 6.suitable voltage (consult the voltage label). 

Facial steamer Operating Methods

 1. Put 5 feet stands on the ground, put the pillar on it, then put this machine on the pillar.
 2. Put the silicon slice on the top of the cup. then put the cup onto the steam room, finally set the cup holder on the tied.
 3. Add water through the pouring hole below the standard level. 
 4. Set steam switch ( WARNING ) to "I" position. (machine )
 5. Set OZONE switch to "I" position. ( machine)
 6. Set POWER switch to "ON" position. ( computerized )
 7. Set up TIMER. ( computerized)
 8. Set steam switch to "START" position. Light on and indicator on. (computerized) 
 9. Set OZONE switch to "I" position. ( computerized )
 10. If You want to stop operation, set steam switch to "STOP" position. light off and indicator off.