FCC Certificate Reverse Car Camera With Normal View Switchable

Specifications

FCC certificate reverse car camera with normal view switchable 

• Mirror view and normal view switchable                                                        
• Adopt digital high-resolution imaging process: 480TV lines
• Extra-low illumination of 0.3 Lux for clear night vision
• Automatic white balance function 
• Viewing angle:170 degree
• Water-proof,shock-proof and anti-jamming functions                                                        
• Mini size: diameter:18.5mm, length:22mm
• Pin nailed installation, hiding mounting

1. Wire Connection

When the camera is to be used for rear view with a monitor to assist with reversing.

2. Technology Data

3. Mirror view and normal view is switchable  

Mirror view and normal view is switchable via a step switch on the power box.

Mirror view is switched on when delivery. You can switch it to normal view subject to your specific needs.

Mirror view is usually used for rear view while normal view is usually used for front view.

4. Camera Installation

A:Choose the proper position for screw holes and cable hole. Use a marker to mark points for the holes.

B:Use a good quality drill bit to drill the holes at the marked points.

C:Route the cable through the cable hole to the rear compartment and secure the camera with a screws. It is suggested to seal the holes with glass cement.