Car reversing sensor car reverse system

Specifications

Car reversing sensor car reverse system

• Self-diagnosis function
• Automatic activation when power up
• Integrated beeper for immediate alert
• Front 2 and rear 4 sensors for full coverage detection
• High brightness LED indicates distance & orientation of obstacl
• After distance setting, it is compatible with tow bar or back tyre
• 3 stages warning by different beeping frequency and 3 colors LED

1. Display

2. Distance adjusting mode:

Distance adjusting is used to take account tow bars or spare tyres fitted to the rear of some vehicles.

Press and hold the right button for 5 seconds. The LED display shows 0.0m. 

Press the right button once to increase the adjustment by 0.1m increments after each press, up to a 

maximum adjustment distance of 0.5m. After 5 seconds without a button press, the number on the 

display disappears, and the system returns to detection mode automatically. 

As an example, if the distance adjustment has been set at 0.1m, the display will show 0.9m whilst the 

distance between the vehicle and the object detected is 1.0m. 

The display distance = Real distance detected – distance adjustment setting pre-programmed. 

3. Technical data

4. Signals

5. Pack contains

1 * command module            6 * ultrasonic sensors         1 * instruction manual

1 * power supply cable          1 * hole borer                    1 * accessory kit

1 * acoustic indicator/LED monitor