Car Diagnostic Tool ELM327 WiFi OBD2 for iPhone, iPad, android

Diagnostic Tools ELM327 WiFi OBDII OBD2 ELM 327 Scan Tool Wireless Scanner For iPhone, iPad, iPod Touch

Overview:

There are tons of software available, which are fully compatible with WIFI OBD interface, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.

By using the device you can monitor all these parameters from your Phone, Tablets,
PC, etc with a compatible software or you can even write your own software on a specified hardware platform if need, because the AT commands are fully documented and very well explained. With proper software installed in the host device, you may have following parameters read out from your vehicle.

Features:

Following are some of the parameters which could be read from the vehicle:

- Vehicle Speed
- RPM
- Fuel Consumption*
- Engine Coolant Temp
- Fuel Pressure
- Calculated Engine Load
- Throttle Position
- Intake Manifold Pressure
- Air Intake Temp
- Timing Advance
- Mass Air Flow
- Fuel Level
- Barometric Pressure
- EVAP System Vapor Pressure
- Fuel Trim

*Note: Your vehicle may not support all above parameters.
How many parameters you can get is depended on the vehicle manufacturer's implementation.

Compatible With:

- SAE J1850 PWM (41.6 kbaud)
- SAE J1850 VPW (10.4 kbaud)
- ISO 9141-2 (5 baud init, 10.4 kbaud)
- ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
- ISO 14230-4 KWP (fast init, 10.4 kbaud)
- ISO 15765-4 CAN (11 bit ID, 500 kbaud)
- ISO 15765-4 CAN (29 bit ID, 500 kbaud)
- ISO 15765-4 CAN (11 bit ID, 250 kbaud)
- ISO 15765-4 CAN (29 bit ID, 250 kbaud)

Technical Details

- SSID: OBDDevice / CLKDevices
- IP/Port: 192.168.0.10:35000
- Antenna: Internal
- Power Consumption: 0.75 Watts
- Wifi Standard: 802.11a/b/g
- Operating Temperature: -15 to 100 Celsius
- Item color: Black(as pictures shown)
- Item size: 88 x 46 x 25mm(L*W*T)
- Item weight: 100g

Package list:

1 x ELM327 WIFI Wireless OBDII 2 Car Diagnostic Reader Scanner for iPhone
1 x CD-ROM