electric flash stamp making machine

Seal materials
Chapter shell, photosensitive seal cushion, photosensitive ink filters, LiuSuanZhi/print film, exposure membrane.
Photosensitive seal engraving process:
1) will make a good sample with laser printers print on LiuSuanZhi or film.
2) according to the sample specification covered with transparent film exposure, the size will be subject to completely cover sample.
3) open the photosensitive machine exposure box, ordinal put photosensitive seal cushion (exposure sne chapter shell, the chapters to remove shell handle and cover, remove the exposure box at the bottom of the transparent organic board, put chapter pad according to the direction in the exposure box), exposure film, print proof. Print proof, exposure film, photosensitive seal cushion between sequence and direction is: the bottom for photosensitive seal cushion, the middle tier for exposure film, print proof on the top, print face down. Three close contact, in turn it is forbidden to have clearance type fold in the middle. Exposure box plate clamp photosensitive machine, photosensitive seal machine.
4) connect the power and open the power switch, the machine start charging.
5) there are many different kinds of photosensitive seal cushion, seal cushion need different light energy. To all photosensitive seal cushion can accurate exposure, the machine adopts depending on the voltage meter shows that free random exposure exposure method. Exposure voltage range from 160 v to 160 v, can be exposed. (used for the first time, it is recommended that the user use leftover material testing for the first chapter mat the best exposure voltage value. As for some domestic photosensitive mat exposure voltage value: LiuSuanZhi typescript 280 v + 5%, film typescript 260 v + 5%). Stay photosensitive machine charging indicator reaches mat exposure voltage needed for this chapter, turn the power off, press the trigger button, complete exposure.
6) will exposure box are taken from the machine, open exposure box, remove exposure good chapter mat, remove the LiuSuanZhi/print film and membrane exposure.
Chapter 7) exposure to good seal cushion into the shell, inject scalar are many seals according to the specifications. User shall be fully absorbed, can deliver customers to use.
Scope of application:
1, cartoon seal;
2, store product packaging seal;
3, wedding seal;
4, seal to seal his birthday;
5, portrait seal;
6 seals, pictures;
7, all kinds of DIY seal
Technical parameters:
Number tube (a) : 2
Flash energy (J) : 1800
Weight (kg) : 12
Overall dimensions (cm) : (length * width * height) : 38 * 26 * 9
Maximum exposure area (mm) : 140 x 80
Power supply: AC 220 v / 50 hz + 10% / 10%
Other information:
Photosensitive printer basic principle is to use special materials, photosensitive, in the seal surface don't need imprinting in the local form a layer of impermeable membrane, so as to achieve the effect of the seal. Therefore, using photosensitive seal engraving seals speed is fast. Photosensitive seal machine without stamp-pad stamp-pad ink, can be repeated filling; User shall not spread, do not fade, is printed is dry; Seal clearly not deformation, not by the sealed pressure; The service life of more than one hundred thousand times; Conform to the requirements of the "seal of public security management information system", the real gourmet anti-counterfeiting; Can be plastic, bond paper, glass or metal stamp. Can be used to manufacture photosensitive seal, seal pen. Badge with sb on it,
Photosensitive printer using video: /v_show/id_XNDgxNTE2NzE2.html? F = 18611668