Rock Gold,Placer Gold Concentration Shaing Table

Rock Gold,Placer Gold Concentration Shaing Table :

Introduction of shaking table:

6S shaking table is widely applied in recovery of tungsten, tin,colombite, gold and many other

rare&precious metals. It can also add in beneficiation procedure of iron, manganese and coal.6S shaking table can be usedin different stages in mining, like rough concentration, retreat and scanvenging. Recovery material size ranges are: coarse sand(0.5 mm to 2 mm), fine sand(0.074 mm to 0.5 mm) and slime(-0.074 mm). Effective mineral recovery size range is 0.22 mm to 2 mm.
Working principle of shaking table:

Beneficiation process is going in the bed surface has reflex bar,mineral particle swarm is send from feed launder of bed surface,meanwhile,from transverse flushing water feed water tank mine shafts into the lateral flushing water, so the mineral particles in the power of gravity, transverse flow momentum ,inertia and friction that produced by bed doing the reciprocating asymmetrical movement ,stratified according to specific gravity and particle size, and do longitudinal movement along the bed and do lateral movement along the inclined bed. So the different mineral particles of ratio and size flow down along their own direction gradually along the diagonal present fanshaped , respectively, discharged from different area of concentrate and tailings side ,finally divided into concentrate, middling and tailings.

Features advantages of shaking table:

1.Stiffness and strength is big;

2.Low water absorption, no weight gain;

3.Good wear resistance of the working surface;

4.Resist chemical corrosion, be able to endure acid and alkali, don't avoid agentia in the mineral pulps ;

5.Good weather resistance, shape stability;

6.Good sorting performance ,stable indicators;

Ms Sara