Pneumatic Hand Held Enamel Wire Stripper

Specifications

Manufacturers & Distributors, Series 4 Limited, was established in 1988 with the sole aim of offering the best possible quality and price combination of production equipment to the electronics and associated industries. Now occupying 3 large units, we have been able to expand our product range and engineering facilities. We are also proud to work with our new international distributors in Australia, Indonesia and the Middle East. We manufacture and sell a large range of production equipment, electric and pneumatic screwdrivers and other assembly tools.

Product Types:

1. Wire Cutting

2. Wire Feeding Equipment

3. Wire Stripping

4. Enamel Wire Stripping

5. Crimping, etc.

Pneumatic Hand Held Enamel Wire Stripper:

The EC4 will strip many film insulations including Enamel, Varnish, Formvar, ML etc for a range of wire sizes between 29 AWG (0.28mm OD) and 8 AWG (3.25mm OD)

Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed.

The insert is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

Operation:

Simple Setup & Stripping Operation

1. Loosen the Chuck Assembly with the two wrenches provided.

2. Place Stripping Insert into the chuck and hand tighten.

3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.

4. Remove the work piece and start the EC4.

5. Strip the wire by pushing into the Stripping Insert and remove to examine.

6. If insulation is not completely removed switch off EC4, tighten Chuck Assembly and repeat stripping operation.

Stripping Insert Options:

Stripping Insert Selection:

Specification: