Crimp Cradle Force Reduction Tool

Specifications

Manufacturers & Distributors, Series 4 Limited, was established in 1988 with the sole aim of offering the best possible quality and price combination of production equipment to the electronics and associated industries. Now occupying 3 large units, we have been able to expand our product range and engineering facilities. We are also proud to work with our new international distributors in Australia, Indonesia and the Middle East. We manufacture and sell a large range of production equipment, electric and pneumatic screwdrivers and other assembly tools.

Product Types:

1. Wire Cutting

2. Wire Feeding Equipment

3. Wire Stripping

4. Enamel Wire Stripping

5. Crimping, etc.

Crimp Cradle Force Reduction Tool:

The CRIMP CRADLE uses a highly efficient tooling set which provides a mechanical advantage, when hand crimping of approximately 10 to 1.

If a hand tool requires 20 kg of operating force the CRIMP CRADLE will require only 2 kg to perform the same operation.

Clamps in the base of the unit, in conjunction with two roller bar tool holders, can be raised, lowered or rotated to accommodate 90% of all hand crimp tools available. This includes both single and double arm movement tools.

A single adjustable clamping mechanism attaches to the upper handle of the crimp tool.

BENEFITS:

• Can double the output of hand crimping operations due to less handling and shorter cycle times.
• Reduces fatigue due to 90% less effort.
• Greatly reduces risk of Repetitive Strain Injuries.
• Squeeze force judgment is eliminated as tool reaches a positive stop position at the end of each operation cycle.
• Reduces rejects due to insertion difficulties when compared to conventional hand use.
• Safer than many small bench pneumatic tools and a fraction of the cost.

FEATURES:

• Safe, fast, one hand operation.
• Manual operation, no power or compressed air required.
• Portable, easily bench mounted by clamps or can be bolted down for permanent sitting.
• Quick and simple to set up and adjust.
• Hand tool calibration unaffected.
• The Crimp Cradle will accept hand tools with an open span between handles of up to:- 305mm (12")
• WEIGHT: - 2.5kg

Specification: