M20 C15 lifting female eye nut (DIN582)
- Shanghai/Ningbo/Tianjin/Qingdao/Shenzhen
- T/T
You May Like
Product Details
| Place of Origin | China | Brand Name | EW | |
| Model Number | DIN582 | Standard | DIN |
Product Description
Specifications
M20 C15 lifting female eye nut (DIN582)1.Material:steel ,stainless steel
2.size :m6-m100
3.finish:black ,zinc ,etc
M20 C15 lifting female eye nut (DIN582)
Forged Eye Nut Lifting Eye Bolt, DIN 582 ring nut
Surface: Galvanized, zinc plated, chromed plated
Material: Carbon steel C15, C15E, SS, Q235 etc
Type: C15, normal WLL and specification, or as you needed
Packing: Plastic bags, carbon boxes, wood pallets and iron pallets
Thread rolling: Threads under metric system or British system
Packing: Carton +Pallet
Instructions for the use of lifting eye nuts DIN 582
Lifting eye nuts conforming to this standard are primarily intended as permanent attachments on
Equipment such as motors, control cabinets, gear boxes, etc. For their transport. When used as temporary
Attachments on larger objects such as large tools for transportation only, the next largest thread size
Should be used. In case of multi-leg slings please refer to DIN EN 818-4.
With the use of screws a washer should used under the head.
Picture 1 — Side pull must be avoided
Before being used, eye nuts should be checked for correct seating and apparent damage (e. G. Corrosion,
Deformation)
Deformed eye nuts should be discarded.
Subsequent color identification (particular in red) must be avoided, to exclude any confusions with highstrength attachment points.
The safe working load values given in table 1 are based on the following assumptions:
· The eye nut is fully tightened by sufficient thread depth;
· The eye nut must be in the correct plane and the collar must sit evenly on the contact surface;
· The length of the bolt thread is sufficient
· The material of the bolt on which the eye nut will be screwed is of adequate strength
Detailed size:
| SIZE | WLL | WLL | DIMENSIONS | Weight | ||||||
| d | t | t | ||||||||
| d1 | d2 | d3 | b | e | h | k | %kg | |||
| mm | mm | mm | mm | mm | mm | mm | ||||
| M6* | 0.07 | 0.05 | 17 | 28 | 16 | 13 | 6 | 17 | 6 | 5 |
| M8* | 0.14 | 0.095 | 20 | 36 | 20 | 15 | 6 | 18 | 8 | 6 |
| M10* | 0.23 | 0.17 | 25 | 45 | 25 | 18 | 8 | 22 | 10 | 11 |
| M12 | 0.34 | 0.24 | 30 | 54 | 30 | 22 | 10 | 26 | 12 | 18 |
| M14* | 0.49 | 0.34 | 35 | 63 | 35 | 28 | 12 | 30 | 14 | 28.5 |
| M16 | 0.7 | 0.5 | 35 | 63 | 35 | 28 | 12 | 30 | 14 | 28 |
| M20 | 1.2 | 0.83 | 40 | 72 | 40 | 30 | 12 | 35 | 16 | 45 |
| M22* | 1.5 | 1.05 | 45 | 81 | 45 | 35 | 14 | 40 | 18 | 67 |
| M24 | 1.8 | 1.27 | 50 | 90 | 50 | 38 | 16 | 45 | 20 | 87 |
| M27* | 2.5 | 1.65 | 50 | 90 | 50 | 38 | 18 | 45 | 20 | 88 |
| M30 | 3.6 | 2.6 | 65 | 108 | 60 | 45 | 18 | 55 | 24 | 166 |
| M33* | 4.3 | 3.2 | 65 | 108 | 60 | 45 | 22 | 55 | 24 | 172 |
| M36 | 5.1 | 3.7 | 75 | 126 | 70 | 55 | 22 | 65 | 28 | 265 |
| M39* | 6.1 | 4.3 | 75 | 126 | 70 | 55 | 26 | 65 | 28 | 280 |
| M42 | 7 | 5 | 85 | 144 | 80 | 65 | 30 | 75 | 32 | 403 |
| M45* | 8 | 5.5 | 85 | 144 | 80 | 65 | 30 | 75 | 32 | 425 |
| M48 | 8.6 | 6.1 | 100 | 166 | 90 | 70 | 35 | 85 | 38 | 638 |
| M52* | 9.9 | 7.3 | 100 | 166 | 90 | 70 | 35 | 85 | 38 | 660 |
| M56 | 11.5 | 8.3 | 110 | 184 | 100 | 80 | 38 | 95 | 42 | 880 |
| M64 | 16 | 11 | 120 | 206 | 110 | 90 | 42 | 100 | 48 | 1240 |
Photo:
-Packing:
1.packing:small box /bulking packing/roll packing+carton+pallets
Usually,48cartons /pallets
-Shipping
1.by express: DHL,FEDEX,UPS,TNT,ARAMEX,etc
2.by sea
3.by air
1.sample :free sample is ok
2.make your logo label
3.packing as your requirements
4.OEM can be accepted
petitive price and high quality
Application:
1.Question: what's you material, OEM is ok ?
Answer:we have carbon steel and stainless steel material , any material can make as your requirements .
OEM is accepted .if large qty there is no need mould fee .
2.Question: free sample is ok ?
Answer:sample for standard is free. sample fee is need for non-standard . but freight you need to pay for it .
of course , you can save the sample fee and freight if you place the order . special sample will send you to test. then after confirmed large prouction will start.
3.Question:How is your packing ?
Answer:usually about inner packing we have bulking packing(polybag packing) ,roll packing ,small box packing ,then put into the carton , last packed into the pallets .
4.Question: How is your quality.
Answer: we can offer you the related material report or quality export as your requirement.
Sample can offer you to test. about the the quality we can promise you the quality after the goods selled six month . if some wrong happens cause the goods quality ,we will offer you the best solution.
Any questions please send us the email or call me . Thanks and have a nice day!
Contact Us
- Shanghai Eastern Waves Co., Ltd.
- Contact nameTammy Wong Chat Now
- Phone86-021-64813008
- AddressRm. 1718, 17/F, No. 2025
Product Categories
| Airless Paint Products | Auto Tools | Bolts | New Products |
| Nuts | Pins | Retaining Rings/Circlips | Screws |
| Threaded Rods | Washers |
New Products
-
Good quality!HEX Thin NUT DIN439!Professional Fastener Manufacturer
-
Hot selling!DIN934 hex nut m32 8grade
-
Good quality!Hexagon nylon insert lock nuts DIN985!
-
hex coupling nut M6X10X30 (DIN6334)
-
steel hex coupling nut M8x13x24 (DIN6334)
-
round coupling nut M10x17x30 (DIN6334)
-
hexagonal coupling nut M12X19X36 (DIN6334)
-
long type hex coupling nut (DIN6334)
-
Hot Selling!Sphere Cap Nut Din917
-
Hex Flange Nuts with Competitive Price and High Quality (DIN6923)
-
M12 steel zinc plated square nut (DIN557)
-
M12 square thread bolt and nut with zinc plated (DIN557)
Popular Searches
- Betel Nuts
- hex nut
- hexagon nut
- Brass Insert Nut
- flange nut
- square nuts
- lock nuts
- Square Nut
- Round Nut
- din934
- pem
- Nut Fastener
- Hex Nut Fastener
- Nut Hardware
- brass insert
- Nuts
- Rivet Nut
- Lock Nut
- Insert Nut
- Cap Nut
- Eye Nut
- Coupling Nut
- Bolt Nut
- slide fastener
- k nut
- u nut
- plus nut
- steel nut
- hardware nut
- standard nut
Recommended Products
- Dacromet Coated M8-M30 Wind Power Grade 8.8 Bolt for Electric Bike
- Bolt Photovoltaic Wind Power Hot-DIP Galvanized Bolt Power Nuts
- Industrial Wind Power Nut with Dacromet Coating for Superior Strength
- Hex nut hex nut high strength grade 8.8 external hex screw cap blackening heat treatment tempered hex thickened enlarged fine tooth nut
- 12.9/8.8 grade high strength black hexagonal nut M2-M42
- 316 stainless steel butterfly/shroud nut, hand-tightened ingot screw
- 201/304/316 stainless steel cap nut GB923 M3-M20
- Flat bottom flange metal lock nut M4-M12
- European standard spring nut profile positioning nut20/30/40/45
- Carbon Steel Bushings with Zinc Plating for Heavy Duty Applications
- Tamper Proof Coupling Nut with Dacromet Finish for Security
- Mitsubishi Pajero & Toyota Prado Chrome Mag Wheel Nuts with Washer 12mm X 1.5 H 21 L37 for Alloy Wheel Lug
Find Similar Products By Category
- Industrial Equipment & Components > Fastener & Fitting > Nut
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Tammy Wong
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile