Relay Module OM511

Specifications

Key words: fire relay module, control module, output module, fire alarm, fire alarm system, fire-fighting, supervised output module

Product Overview 

Applied with advanced MCU single-chip micro-processor, Surface Mount Technology and Two-wire non-polarity Input, the Output Module OM511 possesses 2 kinds of encoding methods both auto-encoding of the Control Panel and electro-encoding of the Address Encoder. It also has the function of auto-measuring Voltage between both ends of the module. This module is used together with the Intelligent Fire Alarm Control Panel OZH4800. The auto-encoding method can take reference to the Instruction of the Control Panel. And the electro-encoding method can take reference to the Instruction of the electronic encoder.

The OM511 Output Module receives the programmed commands from the Control Panel and controls 1 group of the Output signals: NO or NC signal, in order to start the field linkage equipments. Then it receives Feedback signal sent by the linkage equipment after action and transmits the signal of Started and Feedback back to the Control Panel showing the location of the signal, meanwhile lighting the LED indicator. (Blinking green at normal state and Blinking red continuously when Start and Feedback)

Specifications 

Supply Voltage: Two-wire bus, DC20V~DC28V, non-polarity; External power, DC24V

Consuming Current of Relay Starting: < 15mA

Standby Current of Bus: < 0.3mA                Alarm Current of Bus: < 0.6mA

Capacity of the Relay Contact: DC24V, 1A         Range of the address: 1~192

Size: 96×65×37mm (length × width × height)

Using Environment: Temperature: 10°C~+50°C  Related Humidity: ≤95% (40±2°C)Orena

Sales and Service 

Shenzhen Orena Photonic Technology Co., Ltd

Orena Bldg, Zhong'an Industrial Park, Longjing Road, Nanshan District, Shenzhen, 518055, China

Tel: 86.755.2678.7499     Fax: 86.755.2678.7499