engine degreaser spray/engine carbon cleaner/engine surface cleaner in Guangdong

Carton size: 320*247*303mm
Tinplate can size: 70*236mm
as per your requirement

engine degreaser spray/engine carbon cleaner/engine surface cleaner in Guangdong

engine degreaser spray/engine carbon cleaner/engine surface cleaner in Guangdong

Feature:

1,Kadisen engine external cleaning agent strong adhesion, easy to penetrate.

2,The cleaning agent can make the stubborn oil pollution and the engine body separated, the engine is in a state of cooling or heating can be used.

3,After use can make the engine surface to form a layer of protective film so as to make the body bright as new.

Usage method:

1, please confirm that the engine temperature is below 50 degrees Celsius before use.

2, fully shake the tank body, so that the cleaning agent fully mixed, to reach the best bubble effect.

3, the spraying on the surface of the engine rooms of various components and wait for 3-5 minutes, this full penetration and dissolving the surface dirt, grease, dust and other pollutants.

4, the use of water or tap water to clean the surface dirt and cleaning agents.

5, for serious dirt, grease, dust and other pollutants, can be achieved through repeated cleaning effect.

Cozy remind:

1, cleaning agent on the engine under the cover of plastic, rubber parts, no erosion, but should avoid the cleaning agent sprayed onto the surface of the car polishing,

2, Clean with water immediately, if accidently sprayed

3, Electrical parts should be covered before cleaning in order to flushing, affect vehicle launch

4, It is irritative to eyes and skin, if contact, please wash with water, don’t swallow

5, There contains flammable materials, stay away from fire source and heat source, and it is used in ventilation. Pressure packing. Avoid direct sunlight. Storage  below 40 degrees

6, Do not break the empty pot or burn. Keep away from children.

Company profile

FAQ

a) Q: Are you manufacturer or trading company?

A: We are car care products manufacturer with almost 10 years experience, and specialize in producing car cleaner spray, lubricants, refrigerant gases, car clean and polish sprays, and other maintenance products

b)Q: Where is your factory?

A: Our factory is located in Dongguan city, Guangdong province, China. 

It is very convenient to come here. Welcome to visit us

c)Q: Can you make my own brand and design? Is there any extra charge?

A: Yes, OEM and ODM is available. We can make customers' own brands and design without any extra charge. You can send us the designs you have created. Or tell us your idea, then our designer will figure it out.

d)Q: What's the MOQ (minimum order quantity)?

We can accept the small quantity for trial order

 Private brand and design for OEM & ODM is 6000pcs for each item.

e)Q: Is it possible to get free samples? How can we get it?

A: Yes, samples are free within 3pcs. Customers need to pay for the courier cost. 

Samples will be sent out immediately by TNT, DHL or EMS. It will take about 5-7 days to deliver you.

f)Q: How many days for production?

A: It will take about 15-25 days for one 20ft container.

g)Q: What's your payment term?

A: Payment term is as below:

1. T/T, 30% deposit, balance before shipment or against B/L copy.

2. T/T, 30% deposit, 70% by L/C at sight.

OEM service

Container loading: From Port Huangpu, Guangzhou, China.