Small boat crane / boat davit crane / boat hoist for sale

1)Brief Introduction of 450t yacht crane mobile boat hoist crane

The Boat Hoist Crane includes the following items: main structure, traveling wheel block, hoisting mechanism,

steering mechanism, hydraulic transmission system, electric control system, the main structure for the “U”type ,

it can transfer the boat which the height surpass its height.
According to different requirements of our customers, the Boat Hoist Crane can handling different tons boat or

yacht (10T-500T) from the shore side, it can be used for the maintenance on the shore side or can put the new

boat inside the water. It adopts the soft and firm belt to lift the boat, yacht; it will never hurt the surface.

It also can put the boat in sequence quickly with small gap between each two boats.

Electrical system uses PLC frequency adjustment which can easily control every mechanism.

Control Methods: Cabin control / remote control or Cabin control + remote control. 

2)Application of 450t yacht crane mobile boat hoist crane

Rubber Tyre Boat Hoist Crane is widely used for lifting boat in boat factory, outdoor repair shop, or 

lifting yacht, with stable performance, high efficiency and ease maintenance having proper safety

instructions and overload protection devices to maximizely ensure the safety of operational personnel

and equipment.

3)Technical Parameters of 100t yacht crane mobile boat hoist crane

4)Safety Features of 450t yacht crane mobile boat hoist crane

• Automatic rectify deviation control
• Weight overload protection device
• Top quality polyurethane buffer
• Phase protection
• Lifting limit switch
• Cross traveling limit switch
• Long traveling limit switch
• Voltage lower protection function
• Emergency stop system
• Current overload protection system
• Lighting system 
• Light and alarm system

--For the crane traveling, it can move in diagonal direction, it also can steering in 90 degree, it also can put the

   boat in any designated position according to requirements.

--It can adjust the width of the main girder according to the boat in case to handling different side boat.

--This hoist own the performance of low expense, high performance, easy to operate and maintenance and so on,.

--Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.

--It can make the boat in order quickly,, it also can adjust the gap between each boat according to different condition.

Advantages - Double Beam Rubber Tired Gantry Crane

1. Because gantry cranes ride on the ground rather than on overhead runways, they don't require a runway structure.

2. Nor do they usually require concrete foundations.

3. Their installation is fast and simple.

4. Depending on the environment and application, gantry cranes can sometimes provide the same material handling capabilities

   as a comparable bridge crane system, but with a significant cost savings.

5. Simple and compact structure

6. Light weight

7. Steady performance

8. Easy maintenance

9. Less wastage