universal USB charger

Specifications

universal  USB charger
1:USB charge for Mobile,IPHONE,IPAD,MP3,MP4
2:5V 1000ma*2
3:BS approve
4:50*50cm suit for each panel 

5:fishing for each color panel

6:For UK market

5050

Product Specifications:

1:Input:Car charge:DC12V-24V

             Travel charger:100V-240V~,50/60HZ

2:Output:1 USB DC 5V/1000mA

3:Ripple Boltage:<100mA

4:End chargeing current:100mA

5:Over-Current protection.

Must

• USB 2.0, A-type socket AC/DC charger for use in domestic and industrial environments.
• Should operate with a standard, 3-pin UK socket
• Comply with the following regulatory requirements
  • Be fully tested, approved, certified and marked appropriately for CE marking.
  • RoHS compliant and marked appropriately.
  • Fulfil the requirements of Low Voltage Directives 2006/95 EG (EN 60950-1 11/2006)
  • Fulfil the regulations of the EMC Directives 2004/108 EC (EN 55022 05/2008 & EN 55024 10/2003)
  • Any other applicable regulatory standards.
  • Be marked and suitable for WEEE regulatory requirements.
• All EMC and safety test reports to be supplied with samples.
• Pass independent laboratory test conducted by notified body.
• Meet the following electrical requirements
  • Output voltage: 5.0V ±0.25V (at 250mA to 350mA max)
  • Output current: 1000 mA
  • Universal voltage inputs (90V – 250V)
  • Input frequency: 47-63 Hz
• Faultlessly function within an ambient temperature range from -10°C to +55°C, between 5% to 95% non-condensing relative humidity.
• Be suitable for storage and transportation in conditions between –40°C to +75°C and  5% to 95% non-condensing relative humidity.
• Weigh no more than 80g
• The elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second.
• The power supply shall withstand a continuous output without damage.
• Be delivered with appropriate declaration/certificate of conformity.
• Be individually boxed
• Be deliverable through a standard UK letter plate and fit in packaging size L 160mm x H 34mm x D 45mm

Should

• Have instructions
• Not have a cable

Could

• Be multi country socket compatible
• Have an appropriate surface for branding in the future.

Won’t

• Have any branding

Output voltage: 5.0V ±0.25V (at 500 mA) - this may be cheaper and more common to find but will not power/charge our display.