RGB 3channel Constant voltage dimmable led driver 150w

Specifications

dimmable led driver 150w , RGB 3channel DMX512 decoder and constant voltage dmx dimmer.

Introduction:
       YM-HYA is a Constant Voltage address DMX512 Decoder for RGB led lights. By advantage of advanced coding technology, the unit is compatible with international DMX512/1990 standards, which decodes the international popular digital control signals into a PWM signal to drive RGB LED lights. Each channel can be controlled with 256 level gray-scales.

Specification and Parameter:

Grey Scale:  256 levels

Input voltage:  DC9V-32V

Output Current:  5A/Channel*3(all positive)      

Signal input:  DMX512/1990

Signal Output:  constant voltage PWM*3Channels (Frequency:500K-2.5MHz)

Consumption:  <1W

PCB Size: 54*29mm

Features:
1. Perfectly compatible with international DMX512/1990 standards.

2. Differential signal transmission, support 3 mode of data transmission:

3.Display effects:
If connected to DMX512 led controller or DMX512 console, the effects will follow the DMX512 led controller or DMX512 console, and change color per their commands.
If not connected to DMX512 led  controller or DMX512 console, the effects will for pre-load program in side of the decoder.
4.Connection in Parallel
Each decoder is connected on DMX512 signal bus in parallel. It is recommended that signal amplifiers should be used for every 32 pcs of decoders in case of signal drop(Attenuation).
5.Strong anti-interference ability, anti-static and prevent lightening design.

Application:
   LED strip light, LED module light, LED panel light, LED channel light,and LED point source lights, etc.

Input & Output:

Typical Connection: