Scrap/Reel tape cutter CM680 CM480A

Products for Applications:

      If you have trouble with the strip in SMT workshop which is not easy to collect . If you are worried about the machine and accessories damage because of the strip still did not cut , and at the scene of the production of clean, lost customer orders? These worries., perhaps because worry "strip" takes us a lot of trouble, LT introduce automatic intelligent strip cutting machine, which do not need manual management and placement machine cleaning waste belt for you.

     CM series SMT intelligent strip cutting machine is used for patch material recycling.There is no built-in recovery function of the placement machine as usual.Recycling waste material is done with garbage can, personnel use the scissors to cut off the hand. And SMT strip cutting machine is completely replace manual cutting strip with rule collection. Without dedicated facilities placed waste of material, it can do the same work efficiently.

The machine features:

1. Microcomputer intelligent control blanking time delay, and two kinds of patterns :time delay shear belt and sensor model (with board pasted on shear band);

2. Without gas supply, the use of gear motor, high torque, compared to conventional pneumatic cutting tape machine, because the pneumatic high frequency, the high consumption of compressed air, high cutting material cost, high consumption devices in addition to the cost of the blade, not easy to control the produce cost .

3. New cutting machine is suitable for the SMT various material, from 0.04 mm film to 1.5 mm thick belt can be easily cut;

4. Stable performance: imported hard tooth shape HSS cutting tools, similar to the principle of scissors, cut off all kinds of material, stable and durable, effective shearing width is 680 mm;

5. Machine appearance size: (L)900mmX(W)260mmX(H)430mm, cover an area of an area small, usage and storage are very convenient;(this dimension is customized according to customer's placement machine feida head width of);
6. Flexible: only 26 kg weight, equipped with four straight to the caster, convenient transportation.

7. Antistatic type material box + stainless steel stent borders;(advantages: good appearance, light weight, strong and durable), and is equipped with safety sensors.The material box installation of safety sensing device status alarms,no material box without shear zone

8. Precision CNC machining cut foot drive system + double linear guide

9. Adopt CNC sheet metal process + high adhesion plastic spraying processing, durable, premium.

Intelligent microcomputer control, multiple cutting and protection mode

  The import tool and synchronous cutting technology patent

 Precision gear motor, high torque cutting ability 

The material box configuration around double sensor,auto-sensing cut material

Imported precision guide rod and a sliding sleeve system,durable

After upgrading the strip of artificial discard window (humanization design)

CM680A upgrade function: (Third generation intelligent cutting machine)

New functions: the material box increase to about two sensors             

             Add buzzer alarm

                Bejammed overtime alarm and motor protection (20s)

                Increase recycling manual door (other waste input port)

                Improved import tool, increase soft belt cutting ability

Main technical parameters:

Temperature and humidity: 10 ± 40° 20%-90%RH relative temperature

Strip material: 8M tape / 8-44M plastic belt

            / Ethylene soft band (optional cutting)

Cutting cycle: 9 seconds (Not contain delay pause)

Effective cutting width: 680MM (can be customized according to the customer mounter)

Dimensions: (L) 900X (W) 260X (H) 430mm

Weight: 26KG

Access voltage: 220V (110V optional order)

Power: 0.05KW

 Main wearing parts:(Normal maintenance state)

up the main  knife ( high-speed steel (imported)) consumption cycle: 1-2 years  

down the vice knife (high speed steel (imported) consumption cycle: 1-2 years   

Belt loss cycle: 1-2 years  

Improve before and after comparison: (SMT workshop good management, from the CM series intelligent strip cutting machine started!)

Import business case: core competitiveness of enterprises - implement intelligent SMT workshop good Management

                                           Before                                                          After

Suitable for all SMT supporting shape (can be customized according to the actual installation conditions)

The company has set up the equipment exhibition hall in Shenzhen,

welcome the foreign friends to come to visit.

Our service: 

1. Quick response within 24 hours.
2. On time delivery.
3. Techinical support before and after sales.

Contact us:

Shirley  Xie(Sales Supervisor)

**************************************************************************

SHENZHEN LITUO CHUANG NENG ELECTRONIC EQUIPMENT CO., LTD
Shirley                                             Mobile( Whatsapp):  86 13632687345  
Assistant General                         QQ:  2823023317        wetchat: xst827514933
Tel:0755-27231258-8005            Fax:0755-27231256
Adress:Building 21~22, Ma'anshan second industrial zone, Shajing Street, Ban'an district, Shenzhen