automatic poultry feeder

Specifications

   automatic poultry feeder

1.Main feeding line

Main feeding system is a complete set of automatic feeding system, included a material conveying pipe, silo, auger, drive motor and a material level sensor. Main Feed line is mainly used to deliver feed from silo to the hopper in the poultry house. There is one feed sensor at the end of main feed line, which can control the drive motor on and off to realize automatically feeding.

2. Automatic pan feeding line system

Performance parameters of feeding line system

(1) High-quality special driving reduction motor.

(2) V-shaper Bin(with hopper)

Bin volume: 115L, hopper volume :38L

Material: hot-dip galvanized sheet.

(3) Feeding system: Diameter of conveying pipe: diameter :45mm

Material: hot-dip galvanized sheet pipe with the zinc coating amount of morethan 275 square meter .

Helical spring auger from South Africa feeding capacity:450kg/h.

(4) Material level sensor from Israel: time delay range0 to 2 hours.

3 .Automatic nipple drinking line system

This system can provide fresh and clean water for poultry which is crucial for the growth of Poultry. The drinkers can be triggered from 360 degree which helps young birds start well and makes drinking easier.

4 .Automatic ventilation fan system

This system controls climate conditions, fresh air, humidity and temperature in poultry shed, it is vital for growing birds. This system include Poultry house fan, Cooling pad, Air inlet window.

5. Environment control system

This system saves the labor and the resources under the condition of assuring the optimum growth environment of the chickens. It is imported from Israel can set an optimum working m-ode according to the local climate and raising environment

6 .Spraying and disinfecting system

This system effectively cools, humidifies, dedusts and disinfects the hen house(the tem-Perature is quickly reduced by 3-8 degrees centigrade within a few minutes)

                              automatic poultry feeder photo