plastic Twister dry powder inhalation device for asthma treatment

plastic twister dry powder inhaler for asthma treatment

Twister Dry  powder inhaler , DPI devices with more details:

PRODUCT PARTS INTRODUCTION of dry powder inhaler (DPI):
1. Protection cap --contain and protect the inner parts, avoid pollution. 
2. Mouthpiece--for helping users to inhale the capsules powder. 
3. Filter--Prevent the capsule from the medication powder to go through. 
4. Capsule cavity --container capsules & rotate powder during inhale. 
5. Push button-- to puncture the capsule to inhale the powder. 
6. Back Piece--seal the DPI bottom and support the device. 

  Twister Dry  powder inhaler , DPI devices

PRODUCT APPLICATION AND USING SCOPE OF dry powder inhaler (DPI):
1. dry powder inhaler (DPI): is suitable for asthma patients under the strict doctor's guidance. 
2. Cooperating with capsule powder medication to inhale drug. 

MAIN STRUCTURE AND PERFORMANCE of dry powder inhaler (DPI):
dry powder inhaler (DPI):is composed of protection cap, mouthpiece, filter, capsule cavity, push button and back piece

 Twister  Dry  powder inhaler , DPI devices

 Caring for your  plastic dry powder inhaler for asthma treatment

• Keep your dry powder inhaler in a dry place at room temperature.
• Never place the DPI in water.
• Never shake or breathe into the DPI.
• Never use a spacer device with your DPI.
• When taking dry powder inhalers, you may not taste, smell, or feel the dry powder. This experience may be different from what you are used to. As long as you are following the directions, you will get your full dose of medication.

How to clean plastic dry powder inhaler for asthma treatment  ?

 .Clean DPI once a week.

·Open the DPI protection cap.

· Wash the DPI parts with warm water and absorb the water with soft and clean material.

·Do not close the protection cap until dry for 24 hours.

How to use Twister plastic dry powder inhaler for asthma treatment?

 1.Open the protection cap.

 2.Take a capsule out of the blister strip, and put it into the capsule cavity.

 3.Cover the cap on the capsule cavity tightly.

 4.Take a deep breath, and then exhale completely.

 5.Open the cap, pour out the capsule and discard the empty capsule. Close the protection cap.

 6.After completion of the inhalation, rinse your mouth with water, do not swallow.