Professional Flag Post Making Machine

Specifications

Professional Flag Post Making Machine     

This set equipment is the most economical configuration,with high efficiency and reliable quality,they can let users make raw materials to rough poles without cooperation.

Lamp production line equipment(in process)compenent:

1.ZDW43J-6*1800 simple processing line.

2.ZQ11-6*2400*14000 steel plates diagonally shearing production line.

3-1.2-WE67Y-200/7000 tandem press brake(for the street poles)

3-2.2-WE67Y-300/7000 tandem press brake (for the street poles and high mass poles)

4.HFH320*5-14000 automatic welding production line

5.MZ630SS-14000 semi-automatic welding production line.

6.HF500*8-14000 mechanical seam machine

7.W31Y-600*10 steel straightened machine.

8.WG90*4 tube bending machine.

9.ZDMJ-350*14000 automatic grinding machine

10.ZJP-14000 electrostatic spraying prodcution line

The above equipment can order according to your euqipment and producing.don’t buy cause waste.please consult to us if you don’t understand.we can be your best staff officer with sincere heart.insure of your mistake buying.we will do our best to let your make the best use.

Processing flow:

1. coil feeding   2. coil processing   3. steel plates diagonally shear to trapezoidal type     4.bending materials transfer   5. plates bending on press brake   6.transfer poles with seam to submerged arc welding production line 7. straighten steel poles   8.welding flanges and door lights 9.bending poles until forming   10. transfer galvanized   11.spraying (according to the request)   12. install the lights 13. delivery and installation

The area of workshop:it need about 60000*18000mm two to three rooms,without stacking area and welding area.we can design the plant according to the users actual sizes ,ensure the operating production line.it need the power with about 100 kilowatt.

1. Model: ZDW43J-6*1800 simple processing line.

1)Figure of the equipment 

2)Equipment combination.

1).decoiler---2.)side guiding unit---3).leveling machine---4).cutting machine---5).stack table---6).electric system

2.Model: zq11-6*2400*14000 steel plates diagonlly shearing pruduction line

1). Figure

2). Use:

This machine is suitable for the plate cutting processing specially the long plate. Easy of operating and processing of optional length of the plate make the machine productive. Pressing the plate which needs to cut to walking-equipment through the hydraulic cylinder and shear it by revolving cutter accompanied the movement of the walking-equipment. It can also cuts taper plate according to the request inclination. Therefore, this machine widely used in the processing of light pole, vessel,metal structure,ships,building,hardware and so on.

3. 1)Model:2-WE67Y-200/7000 press brake(mechanical block cylinder)

1). Figure

2).Description of machine

This machine was combined by two sets of 200 tons press brake.tandem achieve synchronization working.single machine was combined by worktable ram and right and left wall board.wall baord adopt assemble structure due to the transportation.the rack has enough rigidity.two cylinders install to the right and left wall board,under the effect of electric operation system,drive the slider running down.on slide there is upper dies,when upper and lower dies touch workpieces,system raise pressure,form the workpieces.use different dies,under different bending,can get the different types of workpieces.the quality is reliable and stable.

4.Model: HFH320*5-14000 automatic welding production line

1). Figure

2).Description of machine:

This machine composed by main machine head , tractive body and feeding shelf. Tractive body was moved by collet in small vehicle nipping the steel pole’s collet.when the small vehicle moved,drived steel pole,from small collet to big collet ,regularity moved.the big side of the steel pole was hold by feeding vehicle,force automatic sewing from head of machine to steerable wheel. At one time,the welding machine starts welding.this machine adopt   multiple wire submerged arc welding,solder was reclaimed automatic. Welding line was symmetrical and slinky. It has strong filter,forming one time,and be with high welding efficiency. The speed of welding achieve 2 to 3 meters per minutes,is about 3 times of the gas welding .the cost of the welding is lower than gas weldong. It is with speedy welding ,high efficiency ,and lowest price in china light poles industry now.

5.Model: HF500*8-14000 mechanical seam machine

1). Parameter

2). Figure

6. Model:MZ630SS-14000*700 semi-automatic welding production line

1). Figure

2).Descroption

This machine adopt multiple wire submerged arc welding, lightless, speedy,man adjusting for the polygonal pole.the power of the welding machine is from shanghai welding machine company.welding line was symmetrical and slinky. It has strong filter,forming one time,and be with high welding efficiency. The speed of welding achieve 1 to 3 meters per minutes,is about 3 times of the gas welding .the cost of the welding is lower than gas weldong. It is with speedy welding ,high efficiency ,and lowest price in china light poles industry now.

7.Model:W31Y-600*10 steel straightened machine

1). Figure

2).Descroption  

This machine with easy and compact structure, convenient and reliable.the time of putting steel pole to penetrator can be fit by workers.the workers hold the press-button press molding,the linearity was fit by eyes of the workers,it is with high efficiency.

8.Model: WG90*4 tube bending machine

1)Photo

2).Description: this equipment composed by the board and bending mode, with two sets of molds. Direct mode traction motor reducer, will die on the pressure in the round steel bar along the curved arc surface, simple operation, without heating and filler, economic benefits, compared with the industry's large-scale bending machine is similar effect, is steel manufacturer of equipment necessary.

9.Model :ZDMJ-350*14000 automatic grinding machine

1).Figure

2).Description 

This machine steel tube adopt self-run and the movement of the machine in order tomove the steel tube. The machine is fitted with grinding polishing bar, these grinding polishing bars will grind and polish the surface of steel tube quickly. It is speedy, efficient, saving workers and energy.it was the first choice for grinding and polishing every poles.

10. Model: ZJP-14000 electrostatic spraying prodcution line

1).Figure

2).Characteristic:

The room was combined by cold steel rolling plate ,the structure was easy,and also easy for lor side was install the convulsions sets.at the same time we install the dustproof floodlight.it was very easy to operate spraying.

It adopt spelling installing.there is ripple plate outside.the surface of the oven was rigour,firm,nice,with good heat insulation.the temperature adopt general electrical machine to control,work in heat wind circulate.to keep the temperature in the furnace equality.and fully satisfy powder with 180°C±5°C require of solidifying.

Professional Flag Post Making Machine

Designing, verifying and installation of this machine is according to

Standards hereinafter:

1.GB17120-1997 press brake safty technic condition

2.ZBJ620006.10-88 press brake noise limited

3.JB/T 2257.1-92 press brake safty technic condition

4.GB/T 14349-93 press brake precision

Quality and services

1.The course of designing, producing and selling are performed according to iso 9001.

2.Our company can suplly study , installation and provide parts and repairing service all of the life.

3.Free training and take charge of the adjusting.

4.When equipment arrived, do well of the after service on time,reply in 6 hours and arrive to user ends in three work days.

The above machine all made by us. We can choose correct machine according to your invest and request. We are full of experience to make light poles line. Welcome to visit our factory.