100mm Dia/0.6mm/0.45mm Thickness Agricultural Irrigation Water Pipe

Specifications

1. Material:  PE+PP (composite)

2. Thickness of pipe wall:   Common: 0.45mm

                                                 Strengthen:  0.6mm

3. Working pressure:  max working pressure come into water duct

4. Water duct length:  Max:  100 meters/roll

                                        Min:  30 meters/roll

                                       Can be produced according to customers’ request

5. Using age for water duct:  Common:  3 years

                                              Strengthen:  4-5 years

Advantage:

1. Get state approved patent certificate

2. Water duct is connected with bypass by mosaic, bypass is connected with capillary tube to distribute the water in the water pipe.

Simple structure, convenient to install and dismantle, high connecting efficiency for the water duct and capillary tube, saving installation time;

Water duct can be retrieved easily and reused with high economic benefits

3. Water duct is locked and sealed up with bypass or end cap by Mosaic, or by pad of bypass and seal groove itself, with good sealing effect 

4. For the new type water pipe and assembly, the via hole has inside screw thread structure and the bypass and end cap has external screw thread that can be compatible with inside screw

5. End cap can be installed to plug the via hole if the bypass is no need, water delivery net can be arranged according to the requirement

6.To save water and make the limited water in good use

The Pipe Joint  

Parametric:

Type:  Plastic  Irrigation Pipes,   farm drip irrigation Pipes  farm irrigation Pipe,  agriculture irrigation pipes ,  small farm irrigation system,  agriculture irrigation hose

PLANT A: 

Plant B: 

 Plant C: 

Plant D: 

Our Sales Team 

Our Contact Information