HY-U Automatic suppository filling machine/suppository machine

        HY-U Automatic suppository filling machine /suppository machine 

Mian application:

The full-automatic suppositories production unit is a use of PLC do the whole control and use of pneumatic mode for the automatic production line source of power.  This equipment combining foreign advanced technology and domestic actual situation, the design is novel, the operation is simple, is a highly efficient and stable production unit of automatic suppositories. Its leading position in domestic technical content. In the process of development, we need to consider the user everywhere, adjustable and accuracy can confirm the work, with different parameters, the equipment can mold production of different shapes and specifications of the suppositories can sue different packing material(PVC, PE, PVC/AL/PE Compound film), eliminating unqualified products etc.

Whole machine operating principle

1.Foring part:

film material on the film s plate(PVC/PE)through the gripping agences into forming area to preheating film——>forming mold——>blowing film——>blown film forming .

triangle knife cut edge technology,the dotted line cut.

2.Filling part:

Six nozzles filling,for forming suppository one time embedded filling,filling precision±1%,material barrel with electric-heating insulation system,top with a stirring motor so that drug keep uniform state,the drug in the barrel through cycle pump into filling nozzleis,one time filling the remaining drug cycle through the other end of a raw material barrel to do the next filling.

3.Cooling part:

Filling the entire row of drug finished then into cooling frame,cooling box enternal with chiller block,cooling wind through  four condensers in the cooling box to cooling suppository on the cooling rack.

4.Seal tail and type code:

After cooling the solid suppository into sealing area:pre-heat mold——>seal mold——>type mold.Then cut the finished products a group for six granules or five granules (according to customers requirement).

Equipment advantage:

1.PLC testing function:through on-line monitoring function of PLC operation breakdown self check alarm and show the cause of the problem in synchronization easy operation personnel to remove the faults.

2.Filling with static system in part

Due to trace pharmaceuticals filled in close to bolt shells in the area will flowing under the action of electrostatic force along the empty shell to climb a fraction of a high wall could reach the bolts sealing parts,so will influence the quality sealing behind.

3.Mixing barrel speed regulation system

Due to the different drug matrix series of different fixed mixing effect may be unable to make drugs before filling in the mix of finished  product to affect bolt drug content.

4.The cooling speed regulating system 

Due to the different drug ingredients may need different cooling speed;The cooling speed too slow and low will cause the whole machine production efficiency down;The cooling speed is high may lead to drug because suddenly drop in temperature and spilt so the cooling speed can be adjusted to.

5.Shear grain number can adjustable system

According to customer demand for products such as 4/5/6/7 set grain number.The machine can produce PVC/PE production.