5.8Ghz 32CH 2000mw Transmitter SKY-N2000 Monitor Stand

5.8Ghz 32CH 2000mw transmitter SKY-N2000 monitor stand

Welcome to enjoy the Skysighthobby wireless AV FPV Transmitter. Skysight products have forged a reputation for qualityand reliability and are tested and developed by FPV pilots for FPV pilots.

The SKY-N2000 FPV Transmitter packs a whopping 2000mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The N2000 can transmit a full range of 32 channels and comes with a clean pre-wired harness, it’s perfect for any long range aircraft!

The N2000 boasts an impressive new feature, the transmitting band and channel can be changed remotely by the user with a 3 position switch on their radio. This means you can quickly change to a clear band and frequency should you encounter interference on your existing channel.

Features of FPV Transmitter :

1. Dual-color 128x 64 OLED display showing channel number.
2.  2 ways signal inputs, you can switch video signal source using transmitter during flight.
3.  Low power alert function. support 2-6S, low voltage alert supporting voltage selection.
4.  Power source voltage indicating.
5. TX working current indicating
6. TX working temperature  indicating
7. TX PA detection power indicating

Specifications of FPV Transmitter :

1. FPV 5.8G 32CH 2000mW A/V Transmitter Module (TX) W/ OLED Display | (SMA, jack)
2. video format supported: NTSC/PAL
3. Antenna connector: SMA  jack (module side)   
4. Power input: 6.5-28V (3S Lipo suggested)
5. Transmitting current: 600mA @12V

*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty

Detail Specification:

Packing Accessories List

•  1 x 5.8G 2000mW FPV transmitter
•  1 x Stock dipole whip antenna
•  1 x Power in harness 
•     1 x Power out Video out Audio out harness 

 Product Detail:

Product Show: